Operation Manual

6
9 Reserved Reserved function
10 Screen lock This function can lock up the monitor screen to prevent
unauthorized access of video
11 P/T/Z Click to switch to the panel for Pan/Tilt/Zoom control
(Please refer to the chapter 6 for detail information)
12 Video Playback Click to switch to the control panel for Video Playback
(Please refer to the chapter 7 for detail information)
13 System Setup Click to get into configuration dialog
(Please refer to the chapter 8 for detail information)
14 Camera Name The name given to the camera.
15 Recorded Time The recorded time of the image
16 Minimum Click to minimize the main panel
17 Exit Button Click to exit this program
2. Screen Division layout select
2.1. Full Screen Display Mode
Click on the “ ” to switch to full screen display mode.
2.2. Sequence Display Mode
Click on the “ ” to display video in sequence mode.
Please refer to “Chapter 8.4 Sequence setting” for the allocation of the video screen
in sequence display mode.
2.3. Select different screen division display mode
Click on other icons for different screen division layout.
※Tips:
Please note that for different screen division layout you can use the right button of the
mouse to select other un-displayed channel as shown below: