Operation Manual

8
Name Description
1 Events list table List up to 500 events with “Trigger Time”, “Event
Type”, “Sensor ID”, “CCD ID” and “Description”.
Note: an “ ” icon in front of event indicate a
video clip come with the event.
2 Event list search Search events by specifying Trigger Time, Event
Type and CCD ID
3 Return to main panel Click to return to the main monitor panel
4 Print Image Click to print the current image
Note: Please click pause first before print image
5 Save Image Click to save the current image as Bmp or Jpeg
6 Video playback
control
Stop, Previous frame, Pause, Next frame, play
3.1. Enable video record with the Event log
The user can enable video recording when Motion detected or Sensor detected.
Please refer to “Chapter 8.5 Motion detection setting” and “Chapter 8.6 Sensor
settings” for detail information.
3.2. Pre-alarm recording
Each event is allowed to record video for 3 seconds before the event is triggered.
3.3. Video Recording Time with Event triggered
The recording time of each event is 13 seconds.
4. Video Backup
Click on the “ ” in main monitoring panel to get into the configuration dialogue of
video backup: