H A V - T T 2 5 U SB MANUAL (p.
ENGLISH IMPORTANT SAFETY INSTRUCTIONS FOR AUDIO PRODUCTS -READ THOROUGHLY When using electrical products, basic precautions should always be followed including: 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Instructions - All warnings on the product and in the operating instructions should be adhered to. 4.
a. b. c. d. If the power-supply cord or plug is damaged. If liquid has spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e.
Caution: • Switch off the power to all equipment before making connections. • Read the instructions of each component you intend to use with this unit. • Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. A USB Host Socket Connect one end of the USB cable to the USB host socket on the unit and the other end to the USB host socket on your computer.
UNIT FUNCTIONS 1. PLAY/PAUSE ]I Use to start playback/pause in USB/CARD mode; Press to listen to a preset radio station in TUNER mode. 2. STOP/BAND Use to stop playback or end recording to USB/CARD. Use to cycle alternately from AM and FM. 3. Fast forward ’ In USB/CARD mode, press to go to the start of the next track. In FM/AM mode, press to search for a station on step frequency; hold to search for the nearest station. 4.
BASIC OPERATION 1. Connect the AC power cord to the AC outlet and the power indicator will illuminate. 2. Press the STANDBY button to turn the unit on. 3. Press the FUNCTION button repeatedly to select your desired source: PHONO, TUNER, USB or CARD. 4. Rotate the VOLUME knob to adjust the sound level. 5. Press the STANDBY button again to put the appliance on standby. 6. To completely switch off the appliance, you need to disconnect the power plug from the electrical outlet.
Slide the speed selector (33/45/78) to the proper position depending on the record to be played. Place a record on the turntable platter (remember to use the 45RPM spindle adaptor if required when playing a 45RPM record). Lift the tone arm from the rest and slowly move it above the side of the record. TONE ARM CONTROL INDICATOR will light up. The turntable will begin to rotate. Place the tone arm to the desired position of the record. Adjust the volume knob to the desired level.
Removing the old stylus 1. Set a screwdriver at the tip of the stylus and push down in the direction “A”. 2. Remove the stylus by pulling it forward and down. Installing a new stylus 1. Hold the tip of the stylus and insert the other edge by pressing in the direction “B”. 2. Push up in the direction “C” until it locks at the tip. LISTENING TO THE RADIO 1. Press the FUNCTION button repeatedly until it switches to TUNER function. 2. Press the STOP/BAND button repeatedly to select either FM or AM. 3.
PLAY THE USB HOST 1. Press the FUNCTION button repeatedly until the USB function is selected. 2. Insert an external audio source (i.e. MP3 player) into the USB slot and the display will show ‘USB’ and soon after will show ‘READING’. Note: If the USB device is not detected, ‘NO USB’ will appear on the display. 3. Normally, tracks will be played automatically. 4. Press the PLAY/PAUSE (]I) button to interrupt/resume the playback. 5. Stop the playback by pressing the stop (*) button. ADVANCED FEATURES 6.
DELETE ONE: Press the ’ or ” button to select a track, or press the ’ or ” button until the desired folder is reached. Then press the DELETE button once, “DEL ONE” will appear on the display, press this button again to start deleting the current track. DELETE DIR: If you wish to delete a certain folder in your device, press the ’ or ” button until your desired folder has been reached. Then hold the DELETE button and press the ’ or ” button to select DEL DIR.
3. Normally, tracks will be played automatically. 4. Press the PLAY/PAUSE (]I) button to interrupt/resume the playback. 5. Stop the playback by pressing the stop (*) button. ADVANCED FEATURES 6. Press the ’ button to go the start of the next track. 7. Press the ” button once to go back to the start of the current track. Press the ” button twice to skip to the previous track. 8. Playback mode Press the MEMORY/MODE button repeatedly to cycle from repeat 1, repeat album, repeat all, shuffle, intro and cancel.
DELETE DIR: If you wish to delete a certain folder in your device, press the ’ or ” button until your desired folder has been reached. Then hold the DELETE button and press the ’ or ” button to select DEL DIR. Press th DELETE button again to delete the current folder. DELETE ALL: Hold the DELETE button and press the ’ or ” button to select DEL ALL. Press the DELETE button again to delete all files in your card. NOTE: All delete features are PERMANENT and CANNOT BE UNDONE.
• The CARD indicator at the top of the display will flash to indicate to the user that it is copying to the CARD. RECORD TO USB FROM MMC/SD 1. Insert the USB and CARD at the same time. 2. Press the FUNCTION button repeatedly until the CARD function is selected. • If you want to record tracks to the USB device in a fast speed, press the STOP button to stop the playback. 3. Press the ’ or ” button to select a track, or press the ’ or ” button until the desired folder is reached. 4.
AUDACITY INSTALLATION AND USB CONNECTION Connect one end of USB cable to the appliance and the other end to your computer. Then connect the AC power cord of the appliance. Press the STANDBY button to switch the appliance on. NOTE: If you wish to listen while downloading to your computer, turn the VOLUME knob and adjust to your desired volume level. However, the playback volume level on the unit doesn’t affect the downloading volume level. AUDACITY FOR WINDOWS Installing the Audacity Software 1.
4. The Audacity Setup Wizard will appear. Click Next to install the software. 5. Click on “I accept the agreement” and click Next. 6. Continue to click on the Next buttons.
7. Click the Install button to start installation.
8. Click Finish to complete installation. 9. You can now open the Audacity Software and start recording your files. NOTE: Once you set up Audacity, you do not need to re-set it with each use. (For additional information regarding Audacity features & applications, please visit the Audacity website at www.audacity.sourceforge.
CONFIGURING AUDACITY FOR MICROSOFT WINDOWS Audacity Interface Audacity Control Buttons Use the attribute controls button at the top of the screen to go to beginning, Play, Record, Pause, Stop and End. Use the File, Edit, View, Project, Generate, Effect and Analyze menus to Save, Export, and edit the music. 1. Click the ( ) button to skip to start; 2. Adjust the output volume; 3. Click the ( ) button to play; 4. Click the ( ) button to record; 5. Click the ( ) button to pause the recording; 6.
AUDACITY PREFERENCES 1. Click “Edit” on the Audacity interface, select “Preferences”. The screen will show the Audacity Preferences. You can see Audio I/O, Quality, File Formats, Spectrograms, Directories, Interface, Keyboard and Mouse in the Audacity preference interface. 2. Select the recording device: microphone (USB Audio CODEC) • Click “Audio I/O” in the Audacity Preferences interface. • Click “Device” and select “microphone (USB Audio CODEC)”. • Click “Channels” and select 2 (stereo).
3. Adjust the output and input volume. Output Volume Input Volume NOTE: Because of the variations in the different operating systems, the input volume control may not work on some individual Windows versions. Windows Vista is recommended to ensure the input volume control is working properly. For further details regarding Audacity recording and editing details for PC, Audacity’s home page offers a series of references. To access these materials go to www.audacity.sourceforge.
To download music from Radio (FM) to your computer: 1. Press the FUNCTION button repeatedly until the TUNER function is selected, then press the STOP/BAND button to select FM. You may select the AM band, but the recording quality may be affected by the poor AM reception. Tune to your desired station. 2. Press the ’ or ” button to tune to a radio station. 3. Click the Record ( ) button to start recording. The waves (left and right tracks) will appear on the interface. 4.
GENERAL PROBLEMS FOR ALL WINDOWS VERSIONS 1. When the turntable is connected, you cannot hear any sound if you want to listen to video or music. It is because the default playback device has been changed to USB Audio CODEC once the turntable connects to the PC. Solution1: Remove the USB cable from the PC. Solution2: Vista and Windows 7: Click “Start” and go to the Control Panel. Find and click the “Sound” icon. Click the “Playback” tab and change the playback device. Click ok.
2. If you want to hear the music while downloading to the computer, follow steps below: Go to the Audacity interface. Click Edit and select “Preference”. Then click the “Audio I/O” tab. Follow the setting below. Click “OK” to confirm. Deselect the check box to disable the function.
• In Classic View, double click the Sound icon. • Or in Control Panel Home view, click “Hardware and Sound”. Then click “Sound”.
• • In the Sound interface, select the “Recording” tab. Then, choose a recording device. Herein we recommend you to select Microphone of USB Audio CODEC which is highlighted in the picture and click “Properties”. • Select “Levels” and adjust the Volume Reading. The reading is from 0 to 100. Normally it should be 3-6. However, you may refer to the Input Level Indicator from the Audacity panel that doesn’t exceed 0. Then click “OK” on the Microphone properties interface and Sound interface.
Input Level indicator • • You are downloading music on your computer now. But the music needs to be saved and converted to WAV, Ogg, or MP3 formats before exporting. You may play back the song through your computer. • Simply click the ( ) button to play then turn on your computer speaker NOTE: You may visit the Audacity office website for more detailed information and operation, etc. PREPARING TO EXPORT AND SAVE FOR MP3 FORMAT Prepare for MP3 Export--- (Additional software “lame_enc.
3. Select the File Formats tab and click on the Find Library button. 4. A dialog box will appear. Click “Yes”. 5. Another box appears to locate the “CD ROM”. You will find the “lame_enc.dll” software. Click on the software then click Open.
6. Click on the OK button. Now the MP3 software set up is complete and you may proceed with exporting to MP3 format. DIVIDING TRACKS 1. Press the ( ) button to return to the beginning of the first song. 2. Move the cursor to the wave graphic area, left click the mouse and hold then drag from left to right. Release the mouse when the highlight reaches the end of the first song. Highlight 3. Click the “File” tab then select “EXPORT SELECTION AS MP3”. 4.
Completed box below: Second song to be divided and saved: 1. Move the cursor to the wave graphic at the beginning of the second song. Left click the mouse, hold and drag from left to right until you reach the end of the second song. 2. Click the “File” tab then select “EXPORT SELECTION as MP3”. 3. Follow the steps above to divide the songs one-by-one. TO CHANGE THE TITLES (FOR MP3 FORMAT ONLY) DURING EXPORT SELECTION AS MP3: the software only provides one chance to give a title to the song being saved.
EXPORT AND SAVE FOR WAV AND OGG FORMATS (AFTER RECORDING IS COMPLETE) When the song is finished, click the ( ) button on Audacity. Then lift and move the tone arm to the tone arm rest. 1. Highlight the song which you want to save, and then click the File tab on the Audacity interface. 2. Select “Export Selection as WAV” or “Export Selection as Ogg”.
3. Once you have chosen which file format recording should be exported to, the interface below appears. Here you may provide the file name and the location where it will be saved, i.e. on the desktop. Then click “Save”. Save as WAV Save as Ogg Note: You have an option to save all the songs into one file all at once. After the download is completed, click the File tab and select Export as MP3, Export as WAV or Export as OGG. COPYING THE MUSIC FILE TO AN MP3 PLAYER 1. 2. 3. 4. 5.
AUDACITY FOR MAC 1. Please insert the Audacity Software disk that comes with your unit. Click on the Audacity disk on the desktop. 2. There are five folders in the Audacity disk. Select Audacity_for_MAC for Macintosh system, and select Audacity_for_WIN for Windows system.
Audacity Interface---Settings and controls. At the top of the main Audacity window, to the right of the play control buttons, you will see the input and output level meters (labeled L and R). Under the output level meter is an icon that looks like a microphone. Next to the microphone is a black arrow that points downwards. Click this arrow and select Start Monitor. (If you don’t see the input and output level meters, open your Preferences again as described above.
2. Select the recording device: Core Audio (USB Audio CODEC) • Click “Audio I/O” in the Audacity Preferences interface. • Click “Device” and select “Core Audio (USB Audio CODEC)”. • Click “Channels” and select 2 (stereo). • Click “OK”. Note: If you cannot find the “Core Audio (USB Audio CODEC)” from the Device list, close the Audacity Software, re-open it, then try again, or ensure the turntable is connected to the computer.
3. Under the Quality tab, set the Default Sample Format to 16 bit. Select OK to save your setting and close the preferences window. TO SET THE SMART RECORDING 1. To select the Smart Recording in the Audacity Preferences interface, set the Sound Activation Level (dB) to -36 and then click OK. 2. At the top of the main Audacity window, to the right of the input and output level meters (labeled L and R), you will see the input and output volume.
RECORDING OPERATION To download music from PHONO to your computer: 1. Place the record on the turntable. 2. Move the tone arm over the record to start playing. 3. Click the Record ( ) button to start recording. The waves (top and bottom) will appear on the interface. 4. At the end of the song, click the “Pause” ( ) button on Audacity, then lift and move the tone arm to the tone arm rest. For the next song, replace the album or move the tone arm to another desired song.
After your have finished downloading, you may play back the songs through your computer. In stop mode, simply click the ( ) PLAY button. To download music from a USB device or CARD to your computer: 1. Press the FUNCTION button to select USB (or CARD if desired). 2. Press the PLAY button to play the music. 3. Click the Record ( ) button to start recording. The waves (left and right tracks) will appear on the interface. 4. At the end of the song, click the “Pause” ( ) button on Audacity.
DIVIDING TRACKS When your downloading is complete: 1. Press the ( ) button to return to the beginning of the first song. 2. Move the cursor to the wave graphic area, left click the mouse, hold and drag from left to right. Release the mouse when your desired section in the time bar is highlighted. 3. Click the “File” tab then select “EXPORT SELECTION”. 4. The window will pop up in a dialog box for you to complete the Metadata. Click the OK button after you type it in. 5. Then a window appears.
1. Click on the “File” tab in the Audacity interface. Select “Export” to save the file. 2. The window below will pop up after clicking “Export”. It will default to MP3 format, but you also can select other formats, you only need to click the arrow located at the right of the MP3 Files. TROUBLESHOOTING GUIDE/AUDACITY In case you have trouble with the unit, please look through the list below and see if you can solve the problem by yourself first before calling your dealer.
• Check the microphone slider to make sure that it is at full volume, all the way to the right as shown below: If you are not seeing the microphone slider, please go to the Preferences menu in Audacity, click on the Interface tab and make sure that the Enable Mixer Toolbar and Enable Meter Toolbar options are checked. If they are not, please check them and then press OK. POOR SOUND QUALITY: • • • • Check your stylus connection to make sure it is secured to the tone arm.
SPECIFICATIONS AMPLIFIER section Output Power: 0.8W + 0.8W Frequency Response: 60 TO 20,000 Hz TUNER section FM Section Frequency Range: 87.5 TO 108 MHz Step: 0.05 MHz AM Section Frequency Range: 522 TO 1620 KHz Step: 9 KHz RECORD PLAYER section Motor: DC servo motor Drive System: Belt Driver Speeds: 33-1/3 rpm, 45 rpm and 78 rpm Wow &Flutter: Less than 0.
Safety precautions: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture. Maintenance: Clean only with a dry cloth. Do not use cleaning solvents or abrasives.