User Manual

FUNCTION / USAGE NOTES
TECHNICAL DATA
CHECK, MAINTENANCE, CLEANING
- In the event of workstation maintenance pay attention to possible risks (pinched fingers, impact).
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
Material
Support Arms: Steel, powder coating, black
Struts, Joint, Connector: PA6, black
Joint Screws: Steel, galvanized
Rubberized cushion: Thermoplastic Elastomer (TPE)
max. load Guitars, Cellos, French horns
Dimensions Widest Setting: 300 mm wide, 310 mm deep, 340 mm high
Packaging size W x D x H: 30 x 310 x 360 mm, 0.95 kg
Packaging W x D x H: 35 x 395 x 295 mm
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
17580-014-54/55/59/95 Rev.02 03-79-742-00 3/14
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable
F: R: Check the surface
F: R: Click the struts into place
F: Width of the cushioning rest does not fit
F: R: Place the struts in the proper position
F: R: (4 possible positions)
DIMENSIONS
5.
The gentlest way to store an instrument is by placing the instrument on the
support arm 5.a and then rest it on the back of the stand 5.b.
6.
A wide stand always ensures stability for both the stand and the guitar.
7.
The shape and size of the instrument may require a smaller stand width.
To provide stability for a variety of instruments we provide four width
adjustment positions. Refer to DIMENSIONS.
8.
Looking for you pick is a thing of the past:
a slot is located on the "elbow" of the support arm for picks.