Certifications 2

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
DRUCKLUFT 360
Creationdate :
12.01.16 Version : 3.0
Ref.Nr.:
BDS000430_3_20160112 (EN)
Replaces:
BDS000430_20140623
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
4 / 9
Wear suitable protective clothing and gloves.
6.2. Environmental precautions
Do not allow to enter public sewers and watercourses
6.3. Methods and material for containment and cleaning up
Allow product to evaporate
6.4. Reference to other sections
For further information see section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep away from heat and sources of ignition
Do not spray on a naked flame or incandescent material.
Do not pierce or burn aerosols, even after use.
Do not breathe aerosols or vapours.
Ensure adequate ventilation
Avoid contact with skin and eyes.
7.2. Conditions for safe storage, including any incompatibilities
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not
pierce or burn, even after use.
Store in a well-ventilated place.
Keep out of reach of children.
7.3. Specific end use(s)
Cleaners - Precision
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits :
Hazardous ingredient
CAS-nr.
method
EU established exposure limits:
dimethyl ether
115-10-6
TWA
1000 ppm