Certifications 2

Poland. Ordinance of the Minister of Labour and Social Policy on 6 June 2014 on the maximum permissible
concentrations and intensities of harmful health factors in the work environment, Journal of Laws 2014, item 817
Form
ValueComponents Type
TWA 5 mg/m3 Inhalable fraction.Lubricating oils (petroleum),
C15-30, hydrotreated
neutral oil-based; Baseoil -
unspecified (CAS
72623-86-0)
Slovakia. OELs. Regulation No. 300/2007 concerning protection of health in work with chemical agents
Form
ValueComponents Type
STEL 3 mg/m3 Fume and mist.Lubricating oils (petroleum),
C15-30, hydrotreated
neutral oil-based; Baseoil -
unspecified (CAS
72623-86-0)
15 ppm Fume and mist.
TWA 1 mg/m3 Fume and mist.
5 ppm Fume and mist.
Switzerland. SUVA Grenzwerte am Arbeitsplatz
Form
ValueComponents Type
TWA 5 mg/m3 Inhalable fraction.Lubricating oils (petroleum),
C15-30, hydrotreated
neutral oil-based; Baseoil -
unspecified (CAS
72623-86-0)
No biological exposure limits noted for the ingredient(s).
Biological limit values
Follow standard monitoring procedures.
Recommended monitoring
procedures
Not available.
Derived no effect levels
(DNELs)
Predicted no effect
concentrations (PNECs)
Not available.
8.2. Exposure controls
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Personal protection equipment should be chosen according to the CEN standards and in
discussion with the supplier of the personal protective equipment.
General information
Wear safety glasses with side shields (or goggles). Use eye protection conforming to EN 166.
Eye/face protection
Skin protection
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough
time of the glove should be longer than the total duration of product use. If work lasts longer than
the breakthrough time, gloves should be changed part-way through. Nitrile gloves are
recommended. Suitable gloves can be recommended by the glove supplier.
- Hand protection
Wear suitable protective clothing.
- Other
In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator with
organic vapour cartridge. (Filter type A)
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
Hygiene measures
Emissions from ventilation or work process equipment should be checked to ensure they comply
with the requirements of environmental protection legislation. Fume scrubbers, filters or
engineering modifications to the process equipment may be necessary to reduce emissions to
acceptable levels.
Environmental exposure
controls
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Liquid.
Physical state
SDS EU
Material name: SPRÜHÖL 88 - Kontakt chemie - Europe
BDS000973BU Version #: 1,0 Revision date: 25-March-2022 Issue date: 25-March-2022
5 / 9