User's Manual Part 3

Integrated Device Control Sub-Menu
Feature Options Description
USB – Device 29 Disabled
Enabled (Default)
Enable or Disable all ICH3 USB
1.1 Devices by setting item to the
desired value.
USB – Device 29, Function 1 Disabled
Enabled
(Default)
Enable or Disable all ICH3 USB
1.1 Devices by setting item to the
desired value.
USB – Device 29, Function 2 Disabled
Enabled
(Default)
Enable or Disable all ICH3 USB
1.1 Devices by setting item to the
desired value.
AC97 – Device 31, Function 5 Disabled
Enabled (Default)
Enable or Disable the AC97 Audio
Device if present. This Setup Item
will have no effect if an AC97
Audio MDC is not present.
Advanced Chipset Control Menu
Feature Options Description
IGD Boot Type VBIOS Default (Default)
CRT
LCD
CRT_LCD
Select the Video Display that the
Internal Graphics Device will
make active during the POST:
1) VBIOS Default
2) CRT
3) LCD
4) CRT_LCD
Selecting “VBIOS Default” will
allow the VBIOS to choose the
Video Display to enable.
IGD – LCD Panel Type 800x600 LVDS
1024x768 LVDS (Default)
Select the LCD Panel used by the
Internal Graphics Device by
selecting the appropriate setup
item. The first item is Panel 1, the
last item is Panel 16. Some
Panels are not numbered due to
size constraints.
NOTE: SVGA screen requires
change to 800x600 LVDS.
Default Primary Video AGP (Default)
PCI
Select PCI to use a PCI video
card for the boot display device.
Select AGP to use an AGP video
card for the boot display device.
Graphics Aperture 32MB
64MB (Default)
128MB
256MB
Select the size of the Graphics
Aperture for the AGP video
device.
Enable Memory Gap Disable (Default)
Extended
Free RAM Address space for use
with an option card starting at
15MB.
62 02/25/03 ReVolution User Manual 1.00