Manual

Hardware Description
9 CP-RIO6-923 User Guide
www.kontron.com
3 Hardware Description
This chapter describes the board specific features of the CP-RIO6-923. The building blocks are:
• 12 or 24 1000Base-T ports
• Serial RS232 console connector
• CompactPCI bus connectors
The RIO module does not require a power supply. There are no active components on the board.
3.1 1000BASE-T Ports
Three Integrated Connector Modules (network magnetics + RJ45) are the physical interface for the 10/100/
1000Base-T ports:
• three 2x4 modules for the dual-slot version
• three 1x4 modules for the single-slot version
The dual-slot version supports PICMG 2.16 backplane ports FL1 to FL23 and FLf (Fabric to Fabric Link Port).
The single-slot version supports FC12 to FL23 and FL15 to FL23 on the CP-RIO6-923-9. The switch interfaces
which are accessible via the CP-RIO6-923 are listed in the following table.
Table 3-1: Ethernet Port Mapping
PICMG 2.16 Backplane
Port
CP-RIO6-923 Dual-
Slot Port Label
CP-RIO6-923 Single-
Slot Port Label
CP-RIO6-923-9
Single-Slot Port
Label
FL_f Fx - -
FL_01 1x - -
FL_02 2x - -
FL_03 3x - -
FL_04 4x - -
FL_05 5x - -
FL_06 6x - -
FL_07 7x - -
FL_08 8x - -
FL_09 9x - -
FL_10 10x - -
FL_11 11x - -
FL_12 12x 12x (12x) -
FL_13 13x 13x (13x) -
FL_14 14x 14x (14x) -
FL_15 15x 15x 15x
FL_16 16x 16x 16x
FL_17 17x 17x 17x