User guide

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 24
ASSIGN (ASMP)
FUNCTION: Assign devices to the core specified or display the current
assignments
SYNTAX:
assign [default | <corenum> <devname> …
<devname> | <corenum> all]
where:
assign command
issuing the command without arguments will dis-
play the current assignment for both cores
default option:
set the default assignment
<corenum> parameter: string
0, 1
defines the core to which the device(s) specified
is(are) to be assigned
<devname> parameter: string
<[x … ]x>
defines the device(s) to be assigned
all option:
assigns all devices to core specified
DESCRIPTION: The ASSIGN command provides for selective ordering of a given
device to one or the other of the cores.
The default device assignment is as follows:
Only one core at a time may be addressed, however, more than one
device may be assigned at a time for a given core.
device: core
i2c: 0
eth0: 0
eth1: 0
eth2: 0
eth3: 1
ser0: 0
ser1: 1
device: core
pci: 0
srio: 0
ide: 0
dma0: 0
dma1: 0
dma2: 0
dma3: 0