User guide

ID 1022-8317, Rev. 2.0
Command SyntaxNetBootLoader
Page 45
IPMI
FUNCTION: Display IPMI information
SYNTAX:
ipmi
where:
ipmi command
DESCRIPTION: This command is used to display the currently active IPMI firmware
version and the general status of the MMC.
JUMP
FUNCTION: Jump to script specified by <num>
SYNTAX:
jump <num>
where:
jump command
<num> parameter: string
0 ... 9
ID number of the “nbl<num>.cfg” file in the NAND
Flash containing the script to be executed
no other values than those above are supported
DESCRIPTION: During the standard boot process this command can be used in a
script file to specify a script to be executed when the current script
execution is completed.
If this command is invoked during the alternate boot process it is
disregarded.