Owners manual

Smart motion sensor doorbell
The blue light of the main unit flashes and the selected music will be played when the infrared
detector detects human motion.
Installation guide for Infrared detector
The installation steps can be taken, after confirming that the infrared detector can work normally:
ⓛSelect a suitable installation location;
②Secure the infrared detector
2-2. 2 m
Front Door
Walk around the detection range and observe the LED indicator. The LED light will flash when
the human body is detected to move.
③Test infrared detector
Rotate the universal ball on the bracket to adjust the angle of the infrared detector to achieve
the best detection range.
④Adjust the angle
Doorbell infrared detector: ①Press the pairing button in the battery compartment of the
main unit；②The main unit will beep once, and the indicator light will be on; ③Trigger
wireless accessory, - Install battery；④ The main unit will beep once, and indicate The light
will go out, indicating that the pairing was successful.
①
② ③ ④
If the operation triggers the wireless accessory that has the battery installed, the main unit will
make 2 “beep”, indicating that the accessory has been paired with the main unit. The main unit
enters the working state automatically when all operations are completed. To clear the wireless
accessory, press and hold the pairing button in the battery compartment for 5 seconds. Release
the pairing button when the main unit makes two “beep” and then all the accessories paired with
the main unit can be cleared.
Working principle
Prerequisites for pairing all accessories
130°
5-8 m
Top view of induction range
Shenzhen Koochuwah Smart Technology Co.,Ltd
Manual
KOD-1001
Description of the appearance and components' function
LED light
Previous Track
Next Track
Volume
Pairing
Battery
compartment
Wall bracket
Screw holes
CR123A battery ×2
Loudspeaker
Front View Back View
Doorbell infrared detector
Detection
window
Hidden status
indicator
Bracket
CR123Abattery
Battery
compartment
Features
Small size, full battery design, safe and convenient to use.
Full wireless configuration, DIY self-installation.
Built-in 16777214 groups of RF wireless password combination, safe and reliable.
Pair manually to augment accessories for easy operation.
Can work with a variety of different wireless accessories.
Built-in 52 world famous songs, free to choose.
The perfect combination of alarm and doorbell gives the family full protection.
Low power consumption design, standby for up to one year.
Adopting low power self-encoding wireless technology can avoid external interference, and
the receiving distance in the open area is up to 300 meters.
Overview
The wireless alarm adopts wireless transmission, powered by DC battery, and the installation
is more flexible, saving wiring costs. Users can add other security accessories according to
requirements, or install wireless doorbell alarms in different places in the room to achieve
convenient answering and the effects of deterring illegal intruders when alarming.
Turn on/off
The battery is separated from the main unit when leaving the factory. When working, the
battery should be installed in the left and right battery compartments of the main unit. The
main unit will make a “beep”, indicating that it is turned on successfully. The main unit is
turned off when the battery is removed.
System sound and indication of warning light
Add/clear wireless accessories
Shenzhen Koochuwah Smart Technology Co.,Ltd
Please read the manual carefully before using the product.
Smart sensor doorbell
Technical Parameters
Power: DC 3V (a 3V CR123A battery)
Wireless transmission distance: ≤80m (open space / no interference)
Wireless transmission frequency: 868MHz.
Frequently Asked Question
If the alarm system does not work properly, please check the following list of frequently asked
questions before contacting the service center.
Question Cause / Solution
The main unit
cannot be turned on
①Check if the battery has power
②Check if the battery is reversed
①
then reload the battery.
Remove the battery and press the pairing button for 5 seconds,
No response
when pairing
①Check if the host pairing button is pressed.
②Check if the accessory to be paired is loaded with the battery
Accessories
do not work
①Check if the accessories have batteries
②Check if the accessory is paired
③
cannot receive the signal
Check if the main unit is too far away from the accessory and
No response when
setting the main unit
The recommended installation height is 2-2.2 meters from the ground. The purpose of installing
infrared is to prevent illegal intrusion and to cut off illegal intrusion lines, thus achieving the
purpose of anti-theft.
Secure the mounting bracket to the wall with screws, and secure the groove on the back of the
infrared detector to the bracket.
Doorbell infrared detector
The infrared detector will give ringing when it detects that someone is walking within the
detection range.
The detectable range for human body is 5-8m in front, 130° in level, the detecting
effect is related to ambient temperature, body shape and moving speed.
Smart sensor doorbell
Wireless frequency: 868MHz
Volume: 90dB Standby current: 170uA
Temperature: -10°C +55 °C
Power: DC 6V (two 3V CR123A battery)