ICE MAKER User's Manual Model KCU-110-AH This product is designed for indoor installation. This product requires a floor drain. ● This product comes with a water filter. ● The water and drain hoses are not included and will need to be purchased locally. ● The external appearance, design, color, and components of this machine may be changed without prior notice.
Contents Features of the Ice Maker Safety Warning Safety Precautions 4~9 10~11 Part names 12 Cautions for Installation 13 Installing the Ice Maker 14 Correct Operation 15 Cleaning and Disassembling 16 Cleaning Method 17~19 Sanitizing Procedure 20~21 Ice Making Operations / 22 Maintenance Inspection Items 23 Troubleshooting 24 Specifications 25 Manufacturers Limited Warranty 2 3 26~27
Features ofthe theProduct Ice maker Features of Thankyou youforfor purchasing this ice maker. Thank purchasing this product. Please read through this manual injuries and ensure complete Read through this manual carefully carefully because to it isprevent intended to prevent any loss or accident customer satisfaction. caused by careless use and let you use the product with convenience and ease.
Safety Warning Safety Warning In order to prevent accidents caused by wrong use and to conveniently use the product, be In order to prevent accidents, always use the machine according to these instructions. cautious of and the fully following: Be sure to understand symbols and their Be cautious understand the following symbolsthe andfollowing their descriptions. descriptions first. If you neglect this symbol and wrongly use the product, it may cause fire, serious injury or death.
Warning ■ The Ice Machine must be grounded. - Do not use an adapter or extension cord. - Do not remove the grounding prong. - The unit must be installed in accordance with the state and local electrical and plumbing codes. ■ Use an outlet connected to a circuit breaker. (Minimum 20A) - Failure to do so may cause an electric shock or to product damage. ■ When removing the power plug, do not hold the power cord. - If you pull on the power cord, it may cause damage to the cord, electric shock or fire.
Warning ■Forcibly bending the power cord or placing any heavy object on it may damage the cord. - It may cause an electric leak or electric shock. ■If the power cord is damaged or the metal parts of the power plug are loose, do not use the power cord. - It may cause an electric shock or fire. Contact a service agent if required. ■Do not pull the power cord or move the product during ice production. - It may cause a failure or fire. - It may cause a water leak.
Warning ■ Do not allow any person other than qualified service personnel to disassemble, repair or modify the product. - Disassembly, repair or modification may affect the product safety. - If any failure is detected, refer to this manual or contact the service agency. ■ Install the product on an even and solid surface. - Placing the ice maker on an uneven surface may cause ice production loss and damage to the ice maker.
Warning For cleaning and maintenance, remove the power plug from the outlet and close the water supply valve. Perform work only after the ice maker stops ice production. - It may cause an electric shock or injury Be sure to clean the condenser filter at least once a month. - When dust collects on the condenser filter it will restrict ventilation,which may cause low machine performance, excessive power consumption, and machine failure.
Warning ■ Be sure to use the potable water supply. When moving movingthe the machine, 45 degrees. ■When product, do notdogonot overtilt45over degrees -oIt may cause product failure. ■Do not twist or kink the water or drain hoses. may cause cause water water supply. -- ItIt may waterleak, leak,failure failureororno loss of water supply. ■This outlet must only have the ice maker connected to it. --When multiple plugs are connected through a power strip, it may cause product failure or fire ..
Safety Precautions Caution ■Use this machine as described in the user manual. - If you do not follow the instructions, it may cause an electric shock or property loss. - When transferring the product to another person, transfer the user manual with the product. ■If the machine is going to be stored or not used for a long time, shut off the water supply, unplug the unit and remove all the ice from the bin. Wipe down the inside of the unit with a dry cloth. ■Do not use the product near a fireplace.
Caution ■7R VWRUH WKH LFH IRU D ORQJ SHULRG RI WLPH PRYH LW WR D UHIULJHUDWRU IUHH]HU - 7KH LFH ELQ LQ WKH LFH PDNHU KDV QR IUHH]H IXQFWLRQ DQG UHOLHV RQ WKH FROGQHVV RI WKH VXUURXQGLQJ LFH - ,I WKH LFH LV VWRUHG LQ WKH LFH ELQ IRU D ORQJ WLPH LW ZLOO HYHQWXDOO\ PHOW 6WRUH WKH LFH LQ D UHIULJHUDWRU IUHH]HU WR PDLQWDLQ D VXIILFLHQW LFH VXSSO\ ■'R QRW IUHTXHQWO\ SUHVV WKH SRZHU RSHUDWLRQ VZLWFK -,I \RX IUHTXHQWO\ SUHVVHG WKH SRZHU RSHUDWLRQ VZLWFK LW PD\ FDXVH D SURGXFW IDLOXUH ■,I D ZD
Part names Front view (ICETRO-60V/VH) Rear view Door Rear Cover Display Lamp Front Cover Power Switch Purification Filter Part No. 141-0812 Leveling Foot Connection for Drainage Water Supply Connection Power Cord Detailed drawing Ice Making Evaporator Ice Detection Sensor Water Supply Hose Magnetic Sensor Condenser Filter Leveling Foot 12 12 Water Supply Pump Switches (ICE/OFF/WASH) Purification Filter Part No.
Cautions for Installation Installation Install the machine away from heat sources. - Install the product away from heat generators such as a heater or gas stove. S d tempecifie peratu re - Do not install it in an area where the ambient temperature is below 50oF or above100oF. Install the machine in a place that has good ventilation . - Bad ventilation causes bad ice making performance. Install the machine on an even level surface.
Installing the Ice Machine 1. Removing the packaging - After removing the cardboard outer box from the ice maker, remove the provided parts from inside the ice maker. 2. Attaching the Feet - Screw the feet into the bottom of the unit. 3. Adjusting the level - By rotating the height controllers, adjust until the unit is level. (Use the front feet) 4. Installing the water filter Remove the plastic cap on the bottom right side of the ice maker and install the filter.
Correct Operation Protection of the water supply and drain hose - Do not place any heavy objects on the water supply or drain hose and keep them away from walkways. Adequate water pressure, water temperature, and ambient temperature The ice maker must connected using water with a pressure of 20-80PSI, temperature of 50-90oF and an ambient temperature of 50-100oF. Operation procedure 1. Connecting power -This unit is designed to work with a 110V/60Hz power supply and must a on a dedicated circuit.
Cleaning and Disassembling Read the following carefully for proper handling! Warning : Remove the power plug from the outlet before cleaning the product or replacing parts. It may cause an electric shock or fire. - Do not directly spray water on the ice maker. It may cause a product failure, electric leak or electric shock. Danger ! It may cause erosion or damage to the product. - Do not use the soap powder, benzene, thinners, muriatic acid, petroleum, boiling water or a wire brush for cleaning.
Cleaning Method 【Cleaning the ice bin and water trough.】 1. Set the position of the power switch (ICE/OFF/WASH) to OFF. 2. Remove the power cord from the outlet. 3. Shut off the water supply. 4. Open the door of the ice maker. Door Caution Be careful not to bump your head on the edge of the door while it is open. 5. Remove the drain plug from the water trough. distributor. ice sensor 6.
Cleaning the condenser filter 1. After removing the condenser filter inserted in the front panel, use a vacuum cleaner to remove the dust. Wipe the filter with lukewarm water (approx. 77℉) and neutral front panel detergent, dry it, and reinstall. Condenser filter ※ Clean at least once a month. Cleaning the condenser 1. Release screws (2 EA) at the bottom on the front panel. 2. Remove the front panel by pulling it down. The Story of Cold The Story of Cold ICE ICE 3.
【Using the WASH mode】 1.Set the position of the switch located at the lower right to OFF. ICE 2. After removing ice, dispose of it or store it in an ice box or refrigerator. OFF 3.Diute 1.058 oz of neutral detergent in 8 qts of warm water 95 ~ 113℉ and pour it into the water trough. WASH 4.Press the switch to WASH. The pump motor will run for about 90 seconds and stops for 30 seconds. This operation repeats five times. 5.
Sanitizing Procedure Use a sanitizier to remove algae and/or mould. Do not use a Sanitizer to remove calcic substances or other minerals. 1. Once the harvest cycle has been completed and the ice has dropped off the evaporator, turn off the main switch. Never use excessive force or a sharp utensil to remove ice from the evaporator. 2.Remove the ice from the storage bin and shut off the water supply. 3.Put 0.013gal of a sanitizer into the water trough. (Approximately 5% of the volume of the water trough (0.
12. Turn off the main switch after 10 minutes. 13. Remove the drain plug from the water trough, remove the water, reinstall the drain plug. 14. Proceed with the third Sanitizing Procedure in the same manner as that of the second Sanitizing Procedure (repeat paragraphs 11~13). 15. Proceed with washing process. 16. Open the water supply valve to fill the water trough. Set the main switch to “WASH” position to execute washing process. 17.
IceMaking Makingand Operations Ice Detachment Operations ◆ Once the ice has formed on the evaporator, the ice thickness sensor activates to begin the ice harvest. ◆ The ice is detached from the evaporator using a high temperature gas and the ice is collected in the ice bin. Ice making evaporator Ice sensor Maintenance 1. General maintenance and check list. - The user must install and use the product as mentioned in this manual.
Inspection Items Sensor system 1. Bin full sensor - This icemaker includes an ice bin as part of the unit. - When the ice level reaches the limit, the automatic sensor stops the ice making operation. - When ice is removed from the ice maker, the automatic sensor starts the ice making operation so new ice will be made. - This ice maker operates automatically. 2. Ice thickness sensor 3. To maintain the ice bridge thickness of 3.2 Wire mm(0.12in), the height of the sensor is fixed by factory default. 4.
Troubleshooting Before Calling Service If the ice maker is not operating correctly, check the following items. If the symptoms still the manufacturer local status, service check company. Ifpersist, the ice contact maker operation is not inorgood the following items. If the symptom still persists, contact the purchased site. Operation Status 1. The ice maker does not operate. Check Item Solution 1.Power is supplied? 2.The power switch is turned off? 3.The supplied power is within115 V±10%. 4.
Specifications Spec Item Specification Unit KCU-110-AH M a x i m u m I c e M a k i n g (Lbs/day) (Based on 50F) Freezing Capability S i z e ( Installed Height) Freezing capability Ice is made after 30 minutes. 22.5 Depth Width inches Before After 20.4 33.9 (Feet included) Height Power Package 110.2 110V / 60Hz Single Phase Weight 110.2 lb 114.6 Compressor kw/h 0.
Manufacturers Limited Warranty Ice Machine Limited Warranty Subject to the exclusions and limitations below, MVP Group warrants to the original consumer that any new ice machine shall be free of defects in material or workmanship for the warranty period outlined below, under normal use and maintenance, and upon proper installation and start up in accordance with the instruction manual supplied with the product.
Replacement Part Warranty: Following the expiration of MVP Group’s product warranty, any replacement part purchased by the equipment owner is warranted for a period of ninety (90) days from installation date of replacement part, the compressor or evaporator is warranted for a period of one (1) year from installation date of replacement part. All parts are to be sourced through the local Distributor to qualify for warranty.
Toll Free: (888) 275-4538 international: (514) 737-9701 Fax: (514) 342-3854 Toll Free Fax: (877) 453-8832 3240417-00