Installation Guide

Compartment Sink Assembly Instructions

Step 1. Carefully remove contents of carton. position

sink upside down on a protected surface so you can access the

underside of the sink. Install leg assembly into gussets at each

end.

Step 2. Tighten each Set Screw using 5/32” Allen Wrench included with your sink

PAGE 1
Compartment Sink Assembly Instructions Step 1. Carefully remove contents of carton. position sink upside down on a protected surface so you can access the underside of the sink. Install leg assembly into gussets at each end. Step 2.
PAGE 2
Step 3. Carefully turn sink over onto its legs. Check for stability and adjust Bullet Feet as necessary If you require additional assistance please contact customer service by email support@koolmore.com or by phone For Additional Assistance, Please call Customer Service at: 718-576-6342 Koolmore 1411 President street STE 3A Brooklyn NY 11213 718-576-6342 support@koolmore.