Installation Guide

TABLE OF CONTENTS

RANGE SAFETY ................................................................................................... 3

INSTALLATION REQUIREMENTS ......................................................................... 5

Tools and Parts ............................................................................................................... 5

Location Requirements ................................................................................................. 7

Electrical Requirements .............................................................................................. 11

Gas Supply Requirements ........................................................................................... 12

INSTALLATION INSTRUCTIONS ........................................................................ 15

Step 1 - Unpack Range ................................................................................................ 15

Step 2 - Install Backsplash ........................................................................................... 15

Step 3 - Install Anti-tip Bracket ...................................................................................17

Step 4 - Make Gas Connection ....................................................................................19

Step 5 - Make Electrical Connection ...........................................................................21

Step 6 - Install Range ...................................................................................................21

Step 7 - Level the Range (if needed) ..........................................................................22

Step 8 - Check Operation of Electronic Ignition System ...........................................23

GAS CONVERSION ............................................................................................ 24

Step 1 - Adjust the Regulator ......................................................................................32

Step 2 - Change Burner Ori ices .................................................................................33

Step 3 - Adjust Burner Flames ....................................................................................34

Step 4 - Testing Flame Stability ...................................................................................35

Step 5 - Flame Re-Check .............................................................................................35