Instructions / Assembly

30
- Seams, pockets, and other similarly heavy areas may not be
completely dry when the rest of the load has reached the
selected dryness level. This is normal. Select the Time Dry
setting if desired.
- If one heavy item is dried with a lightweight load, such as
one towel with sheets, it is possible that the heavy item will
not be completely dry when the rest of the load has reached
the selected dryness level. Sort heavy items from lightweight
items for best drying results.
Problem
Solution
Clothes are unevenly
dried
Shuts off before
load is dry
- Household odors from painting, varnishing, strong cleaners,
etc. may enter the dryer with surrounding room air. This is
normal as the dryer draws the air from surrounding air space
of the dryer locations.
- When these odors linger in the air, ventilate the room
completely before using the dryer.
Garments still wrinkled
after Wrinkle-prevent
- Small loads of 1 to 4 items work best.
- Load fewer garments. Load similar-type garments.
Odors remain in clothing
after refresh
- Fabrics containing strong odors should be washed utilizing
desired wash cycle.
Lint on clothes
- Lint filter be cleaned before every cycle. With some loads that
produce high amounts of lint, it is necessary to clean the filter
after the cycle.
- Some fabrics are lint producers (for example, a fuzzy white
cotton towel) and they should be dried separately from clothes
that are lint trappers (for example, a pair of lack linen pants).
- Divide larger loads into smaller loads for drying.
- Check pockets thoroughly before washing and drying clothes.
TROUBLESHOOTING INSTRUCTIONS
“ ”is lighting
“ ”is ingflash
Clear lint filter.-
- When the cycle is end, “ ”will flash and dryer will beep 5
seconds.
- Check the water container. If it's full, please pour out the
condensate water and restart the dryer.
- If the container is not full, please restart the dryer directly.
- If the “water full“ icon is still flashing after you have
finished the first two steps, please call the service.