ICE NUGGET MAKER USER MANUAL KoolMore Built-in Residential Pearl Ice Nugget maker Model: KM-BIM66-NSS
Stay informed with the latest information for your KoolMore Appliance. If you need any assistance or have questions, our customer support team is here to help.
SAFETY • When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. • Use this appliance only for its intended purpose as described in this owner's manual. This ice-maker must be properly installed in accordance with the installation instructions before it is used. • This unit must be positioned so that the plug is accessible.
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. WARNING: Children should be supervised to ensure that they do not play with the appliance. WARNING: This appliance must be earthed. And use the 110-120V/60Hz earthed power supply. WARNING: Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
INSTALLATION UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging. Check if all the accessories are inside or not including the instruction manual, ice scoop, white water inlet pipe, the water draining pipe, the quick connector (connecting a 1/4-inch connector with a 1/2-inch one), etc. If any parts are missing, please contact our customer service. 2. Remove the tapes for fixing the door and inner cabinet, ice scoop, etc. Roughly clean the inner cabinet & ice scoop with wet cloth.
The ice maker requires a continuous water supply with 1-8 bar pressure as required in above specification table. The temperature of the water feeding into the ice maker should be between 41°F and 77°F for proper operation. ELECTRICAL REQUIREMENT & CONNECTIONS WARNING: THIS UNIT MUST BE EARTHED. • • • • • Electrical Shock Hazard plug into a grounding wall outlet. Never remove the ground prong. Use separate power supply or receptacle. Never use an adapter. Never use an extension cord.
STEP 1: Remove the tape first STEP 2: Insert the water hose Then install back the clipper Water inlet port on the unit back Remove the clipper first White water hose(accessory) First insert the water hose inward completely Connect the water supplying hose to the unit Step 1:First remove the tape on the water inlet port for water supply (indicated in the following illustration “B”) located at unit back, then use your other hand’s finger to press the out circle.
Normal Sounds Your new ice maker may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor, walls and cabinets can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. • • • • • • • • You will hear a swooshing sound when the water valve opens to fill the water tank for each cycle. Rattling noises may come from the flow of the refrigerant or the water line.
OPERATION OPERATION YOUR UNIT Operation button and display area diagram Fig.3 OPERATION AREA DISPLAY AREA OPERATION AREA TIMER CLEAN ON/OFF + - OPERATION OF ICE MAKING PROCESS TIMER CLEAN Quickly press this button once, to enter the Timer setting program; And press this button for more than 5 seconds, to enter the Cleaning program.
Automatic self-cleaning symbol display. 3 1. Press “TIMER CLEAN” button on control panel for more than 5 seconds, to enter the self-Cleaning program. 2. The default cleaning time is 15 minutes. 3. Press the “ON/OFF” button on control panel to cancel the self-cleaning program by force. On/off symbol display. 4 5 Error code display E1 No water ingress for a long time E2 means the environmental temperature sensor is damaged. E means drain pump not work. Water flow in and water shortage display 1.
MAINTENANCE CLEANING TIPS WARNING: Before carrying out any cleaning or maintenance operations, unplug the ice maker from the main power supply electricity. (EXCEPTION: Ice maker self-cleaning program). Do not use any alcohol or fume for cleaning / sanitize of the ice maker. It may cause cracks on the plastic parts. Ask a trained service person to check and clean the condenser at least once a year, in order to let the unit work properly. This appliance must be cleaned by use of a water jet.
acetic acid 3. Appropriate amounts of acetic acid solution was added at the indicated positions.(Fig.5) 4. Reinstall the transparent windows to prevent water leakage, please ensure proper installation. 5. Press the cleaning button on the operation panel for more than 5 seconds to start the cleaning program, and the cleaning will end after 15 minutes. 6. You can pull the drain plug (Fig.6) to drain the cleaned water in the water tank.
end of every day, rinse the ice shovel and wipe the both sides of the door with a clean cloth. SEMI-MONTHLY CLEANING The ice shovel, ice bin, water tank, the ice-full detecting plate and the surface of the evaporator are to be cleaned by yourself semi-monthly according to interior cleaning program. SEMI-ANNUAL CLEANING All the components & surfaces exposed to water or ice cubes, like ice storage bin, water tank, door, evaporator, water pump, silicone tube, water dividing pipe, etc.
TROUBLESHOOTING Problem “🔥 ❄ ” symbol is lightening on and the arrow flashes . Possible Cause Solution Lack of Water. Stop the ice maker, fill water, and press “ICE/CLEAN” button again to restart the unit. There is too much ice. “❄F” symbol is lightening and letter “F” flashes. Suggest you obtain the ice-cube. Remove the probable obstacle inside or clean the inside wall of the ice storage (No ice cube inside.) Press “ICE/CLEAN” button for 5 seconds, it will work for 80 minutes.
CIRCUIT DIAGRAM ELECTRICAL DIAGRAM Start Relay MW N L G Overload Protector Power Supply Cover Motor PUMP Main Control PCB AC Water Pump Cover Motor Relay Relay DC Fan Motor LCD M AW~ DC Water Inlet Valve Water Level Detecting Switch T1 Swnsor For Ambient Temp Infrared Emission Water level detection for drainage infrared reception 6C Disposal When the unit is not to be used again, disposal of this unit's material shall be in accordance with national regulations.
Koolmore Supply, Inc. extends a limited warranty to the original purchaser, guaranteeing that this Koolmore product is free from manufacturing defects in material or workmanship for one year from the date of purchase. Should you discover any such defect within the warranty period, Koolmore Supply, Inc.
