Use and Care Manual

3
4
On/off symbol display.
5
Error code display
E1 No water ingress for a long time
E2 means the environmental temperature sensor is damaged.
E means drain pump not work.
6
7
8
Automatic self-cleaning symbol display.
1. Press “TIMER CLEAN” button on control panel for more than 5
seconds, to enter the self-Cleaning program.
2. The default cleaning time is 15 minutes.
3. Press the “ON/OFF” button on control panel to cancel the
self-cleaning program by force.
Water flow in and water shortage display
1. The arrow flashing indicates that the machine is adding water.
2. The whole symbol is bright to indicate that the machine is short
of water.
Ice full alarm
1. The machine will making ice again when you take out the ice.
2. When this symbol appears and cannot be eliminated, long
press the power button to force the ice for 80 minutes.
Setting display timed switch machine: 1-24 hours
1. When the machine is running, set to shut down after 1 hour.
2. When the machine is on standby, set it to turn on after 1 hour
CLEANING TIPS
WARNING:
Before carrying out any cleaning or maintenance operations, unplug the ice maker from the main
power supply electricity. (EXCEPTION: Ice maker self-cleaning program).
Do not use any alcohol or fume for cleaning / sanitize of the ice maker. It may cause cracks on the
plastic parts.
Ask a trained service person to check and clean the condenser at least once a year, in order to let the
unit work properly.
This appliance must be cleaned by use of a water jet.
CAUTION
If the ice maker has been left unused for a long time, before the next use it must be thoroughly cleaned.
Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any
solution inside the ice maker after cleaning.
Periodic cleaning and proper maintenance will ensure efficiency, top performance, hygienic, and long
life. The maintenance intervals listed are based on normal conditions. You may want to shorten the
intervals if you have pets, or the unit is used outdoors, or there are other special considerations.
What shouldn’t be done
Never keep anything in the ice storage bin that is not ice: objects like wine and beer bottles are not
only unsanitary, but also it’s labels may slip off and obstruct the drain pipe.
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and warm water solution such as 28g of
dish washing liquid mixed with 7.5L of warm water. Do not use solvent-based or abrasive cleaners.
Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
Stainless steel models can discolor when exposed to chlorine gas and should be cleaned. Clean
stainless steel models with a mild detergent and warm water solution and a damp cloth. Never use
abrasive cleaning agents.
NOTICE: Stainless steel models exposed to chlorine gas and should be cleaned, such as in areas with
spas or swimming pools, may have some discoloration of stainless steel. Discoloration from chlorine
gas is normal.
CLEAN THE PROCESS
Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Use both thumbs to open the transparent window. (Fig.5)
2. Repeatedly clean the water contacting inner parts.
3. Appropriate amounts of acetic acid solution was added at the indicated positions.(Fig.5)
4. Reinstall the transparent windows to prevent water leakage, please ensure proper installation.
5. Press the cleaning button on the operation panel for more than 5 seconds to start the cleaning
program, and the cleaning will end after 15 minutes.
6. You can pull the drain plug (Fig.6) to drain the cleaned water in the water tank.
Note:This operation step is mainly to soak the ice-making mechanism to dissolve the stubborn scale
7. Then reinstall the drain plug. (Fig.6)
8. Start the cleaning program again, end in fifteen minutes, then press the power button to start ice
making.
9. Ice produced within 15 minutes is not recommended for consumption
10.The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm
water.
11.Dry the interior and exterior with a clean soft cloth.
INTERIOR CLEANING FOR ICE STORAGE BIN
The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for
the first time and reused after stopping for an extended period of time. It is usually convenient to
sanitize the bin after the ice making system has been cleaned, and the storage bin is empty.
1. Disconnect power to the unit.
2. Open the door and with a clean cloth, wipe down the interior with a sanitizing solution made of 28g
of household bleach or chlorine and 7.5L of hot water(95°F to 115°F).
3. Rinse thoroughly with clear water. The waste water will be drained out through the drain pipe.
4. Reconnect power to the unit.
NOTICE: The ice scoop should be washed regularly. Wash it just like any other food container.
WARNING
DO NOT use solent cleaning agents or abrasives on the interior.
These cleaners may transmit taste to the ice cubes, or
damage or discolor the interior.
CLEANING SUGGESTION
DAILY CLEANING
The ice shovel, door and the water dividing pipe should be cleaned by yourself per each day. At the
end of every day, rinse the ice shovel and wipe the both sides of the door with a clean cloth.
SEMI-MONTHLY CLEANING
The ice shovel, ice bin, water tank, the ice-full detecting plate and the surface of the evaporator are to
be cleaned by yourself semi-monthly according to interior cleaning program.
SEMI-ANNUAL CLEANING
All the components & surfaces exposed to water or ice cubes, like ice storage bin, water tank, door,
evaporator, water pump, silicone tube, water dividing pipe, etc. should be cleaned by Using
Nu-Calgon Nickle Safe Ice-machine Cleaner per each 6 months. They should be cleaned by the
serviceman according to ice making assembly system cleaning program.