Use and Care Manual

TROUBLESHOOTING
Symptom Possible Causes Remedy
Warmer not operating
Not connected to power
source
Connect to power source.
No power
Check circuit breaker or
GFCI switch.
Moisture problem Dry moisture problems.
GFCI or Ground Fault
Circuit
Shorted element
Contact authorized service
provider.
Indicator tripped Pinched/damaged wire
Contact authorized service
provider.
Damaged power cord
Contact authorized service
provider.
Warmer is connected to
power
Defective: Heating element,
Contact authorized service
provider.
source, thermostat is
turned on
thermometer, thermostat, etc.
but warmer not heating
Troubleshooting Guide:
Always check the following first:
1. Verify the unit is connected to a live power source with the correct voltage.
2. Inspect the circuit breaker.
3. Ensure the power switch is in the "ON" position and the pilot light is active.
4. Confirm the unit is connected to the correct power source as indicated on the rating label.
Troubleshooting Steps: