UPRIGHT DISPLAY COOLER CONTENTS © SAFETY PRECAUTIONS ~ 1~3 CHOPHOUSE 4~ GLEANING CASE OF THE FOLLOWING BEFORE REQUESTING SERVICE Please read these instructions completely before operating the units.
SAFETY PRECAUTIONS @ To ensure proper use, please thoroughly study these SAFETY PRECAUTIONS before operating the Unit. @ The purpose of the safety precautions in this manuals to ensure safe and correct use of the unit te minimize risks that could cause serious damage and injury to you or other persons, The safety precautions are divided into WARNINGS and CAUTIONS. Cases where improper handing of the unit could lead te death or serious Injury are listed under the WARNING' heading.
SAFETY PRECAUTIONS A Never put flammable or volatile substances info the unit as explosion and fire could result. . @ /WARNING not damage, modify, excessively bend, strain, twist or bundle up the power cord. Also, placing heavy objects the power cord or squeezing It In a tight place could damage It, possible resulting In electrical shock or fire. = Q Use a dedicated wall outset. Do not use extension cords or convenience receptacles as this could result In electrical shock, overheating and a fire.
SAFETY PRECAUTIONS /WARN Leave disassembly and disposal of the unit fo squalled experts. ING 0 Should the unit need temporary storage, make sure not fo store the unit In a location where children play and take precautions so that the door cannot be completely closed. This will minimize the nsk that a child becomes trapped Inside the compartment. WELL VENTILATED PLACE Places make sure there is more methane space boatmen upright tolerance the wall. If theta is no space, cooling capacity can drop down.
HOW TO USE BEFORE USE #Remove shipping package, gape, eic, and leave doors open. Ventilate for a while. #The unit is cleaned before shipment. However, clean the compartment interior after delivery. «Please Insert power supply plug Into the wall outset ,single-phase 1o connect voltage. #Allow the unit o operate for about 1 hour to cool the compartment before placing items in the cooler.
HOW TO USE PLACING ITEMS IN THE SHOWCASE This showcase employs a forced circulation of cold alr system. K circulation of cold alr Is obstructed, the stems will not be adequately refrigerated. Pay attention to the following points: ® Do not let rems obstruct the cold alr Inlet and suction outlet. * Place stems so that they do not protrude from the shelves. The gap between the shelves and the » soot Is used for circulation of cold alr « Place totems evenly on all shelves.
IN CASE OF THE FOLLOWING 1 POWER FAILURE Keep opening and closing of the door to a minimum. Av old placing new hems In the cooler as this wil reals the temperature Inside the compartment. 2 WHEN NOT USED FOR A LONG PERIOD Remove dll hems from the compartment and disconnect the power cord plug from the will outset, Clean the compartment inferior and wipe away ail water. To prevent mold formation and bad smell, leave the door open 1o diy the compartment completely.
BEFORE REQUESTING SERVICE S~ No refrigeration natal @1s the power supply Interrupted? @1s the power cord plug disconnected from the wall outlet? @Are the shop's power fuses blown candor the circuit breaker activated? Inadequate refrigeration @1s the temperature effing appropriate? @ Are items obstructing the cold air inlet and suction outlet? @ Are stored items packed foo fight? & Is the door open or Is It opened and closed frequently? & s the condenser clogged? Excessive nose @ Are all feet in firm contact