Instructions / Assembly

Assembly Instructions

Commercial Work Table With Casters

Let the tabletop upside down on a soft cloth to prevent scratches.

Insert one pipe into tabletop leg sockets.

Remove the allen screws and allen wrench.

After securing three pipes.

Position under shelf 6 inches or more above the ground.

Slide the last pipe.

Each corner support requires two allen screws.

Wait until the table is completely assembled before securely

tightening each allen screw.

All four pipes can be adjusted for the surfaces that are

not completely level. Rotate the plastic foot pad for differences

in floor surface.

Turn the table over after each screw is securely tightened.

Two people should be required to rotate the table.