Assembly Instructions Commercial Work Table With Casters Intended for other than household use. Unit must be kept clear of combustibles at all times.
Assembly Instructions 1 Let the tabletop upside down on a soft cloth to prevent scratches. Insert one pipe into tabletop leg sockets. 2 Remove the allen screws and allen wrench. 3 After securing three pipes. Position under shelf 6 inches or more above the ground. 4 Slide the last pipe. 5 Each corner support requires two allen screws. Wait until the table is completely assembled before securely tightening each allen screw.
Warranty Limited Service Warranty Valid only in the United States 1 Year Parts and Labor Warranty Unless otherwise stated, Koolmore Supply Inc. warrants to the original purchaser of new Koolmore work table, that such equipment will be free from defects in material and workmanship for a period of 1 year from the date of delivery. Valid only in the Continental United States.
