User Manual

4
Plugging In and Setting Up
1. Use the included power adapter to connect the switcher to an AC power source.
2. Use an HDMI cable to connect a signal source to an available HDMI input on the switcher.
Repeat this step for your other signal sources. You can connect up to four sources to
this switcher.
3. Use an HDMI cable to connect the output of your switcher to an available HDMI input on your
display device.
4. To cycle through the signal sources, press the source selection button on the front of the switcher.
IR Output Power
Source
SelectionInput 1 Input 2
Input 3 Input 4
IR IR Ext
Sources
Display