User Manual

Using the Remote Control

You can use the included remote control to wirelessly select the signal

source of the HDMI switcher. Before using the remote control for the rst

time, you will have to install the included battery.

To install the battery, follow these steps:

1. Pull the battery tray out of the remote.

2. Insert the battery into the tray, making sure the side marked

with a plus sign (+) is facing up.

3. Push the battery tray back into the remote so it locks in place.

To cycle through the signal sources, press the

and buttons on the

remote. To select a specic signal source, press the corresponding

numbered button on the remote (1 through 4).

Input 1 Input 2

Input 3 Input 4

Input