Datasheet

Electric Double Layer Capacitors Product Specification
11
10. Mounting
When you solder STARCAP to a printed circuit board, excessive thermal stress could
cause the STARCAP's electrical characteristics to deteriorate, compromise the integrity
of the seal or cause the electrolyte to leak due to increased internal pressure.
① Recommended condition of flow soldering
② Recommended condition of manual soldering
- Soldering Tip Temp. : 350℃ or less
- Soldering Time : 3 sec. or less
- Times : Three times or less at intervals of 9 sec. or more
※ Do not touch the metal case of STARCAP with a soldering iron.
③ It is not allowed to go through reflow (IR, Atmosphere heating methods etc.)
process.
④ The terminals are plated for good solderability. Rasping terminals may damage the
plating layer and degrade the solderability.
Do not apply a large force to the terminals. Otherwise, they may break or come
off or the STARCAP characteristics may be deteriorated.