User's Manual

CHAPTER 2
2-2 Setting Up Your System
Using a tool such as an opened paper clip, slide the voltage selection switch to the
correct voltage position.
WARNING
If you set the voltage selection switch incorrectly, your system will have the serious
damage. Verify that the switch is set correctly before you power on your system.
2. Checking the Voltage Selection
A power supply is integrated into the system to provide power to the mainboard,
option cards, and peripheral devices. The power selection switch on the system back
panel can be used to set the power supply to operate at 115V or 220V.
To verify that your system has the correct setting for your environment, check the
voltage selection switch.
Voltage selection
switch