User's Manual

CHAPTER 3
3-2 Using Your Computer
If you want to remove the disk, press the eject button after you make sure the drive
light is off.
NOTE
If you remove a disk or turn off the computer while the drive light is on, you can lose
data in the disk.
Also, remove all disks before you turn off the computer.
You can write-protect a disk to prevent its data from being altered. When a disk is
write-protected, you can read it and copy data from it, but you cannot store new data
on it or delete any files it contains.
The write-protect is on the back of a 3.5 inch disk as the below picture. If you want
to use write-protect, slide the switch toward the edge of the disk.