User's Manual

BIOS Configuration 4-9
CHAPTER 4
● Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80
Tracks. 360K type is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
The default value is Enable.
Floppy Select your boot device priority by Floppy
LS120 Select your boot device priority by LS120
HDD-0~3 Select your boot device priority by HDD-0~3
SCSI Select your boot device priority by SCSI
CDROM Select your boot device priority by CDROM
ZIP100 Select your boot device priority by ZIP100
DISABLE Disable this function
LAN Select your boot device priority by LAN
● First / Second / Third Boot device
The default value is floppy / HDD-0 / LS120
Enable BIOS searches for floppy disk drive to determine it is 40 or 80 tracks.
Note that BIOS can not tell from 720K, 1.2M or 1.44M drive type as
they are all 80 tracks
DISABLE BIOS will not search for the type of floppy disk drive by track Number.
Note that there will not be any warning message if The drive installed
is 360K
● Boot Up NumLock Status
The default value is On
ON Keypad is number keys
Off Keypad is arrow keys
● Typematic Rate Setting
The default value is Disabled
Enabled Enable Keyboard Typematic rate setting.
Disable Disable Keyboard Typematic rate setting.