User's Manual

BIOS Configuration 4-29
CHAPTER 4
Type the password, up to eight characters, and press <Enter> key. The password
typed now will clear the previous entered password from CMOS memory. You will
be asked to confirm the password.
Type the password again and press <Enter> key. You may also press <ESC> key to
abort the selection and not enter a password.
To disable password, just press < Enter> key when you are prompted to enter
password. A Message “PASSWORD DISABLED” will appear to confirm the
password being disabled.
Once the password is disabled, the system will boot and you can enter Setup freely.
If you select system at Security Option in Bios Feature Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to
enter Setup Menu. If you select Setup at Security Option in BIOS Features Setup
Menu, you will be prompted only when you try to enter Setup.
4.15 Set Supervisor / User Password
When you select this functions message will appear at the center of the screen to
assist you in creating a password
Esc : Quit : Select Item
F10 : Save & Exit Setup
CMOS Setup Utility - Copyright (C) 1984-1999 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management
Pnp/PCI Configurations
PC Health Status
Save Date to CMOS
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
word
etup
Saving
Enter Password?
Set Supervisor Password