User's Manual

CAPTUER 2
2-8 Setting Up Your System
Connecting a Power Cord
Before you plug the power cord into the wall socket, you should set the voltage
selection switch to correct position. The voltage selection switch must be set to
reflect the correct voltage the system operates on.
If you set the voltage selection switch to correct position, plug the power cord into
the AC power receptacle on the back panel. Then plug the other end of the power
cord into an appropriate grounded electrical outlet.
Connecting the USB Devices
If you use any USB devices, you can connect it to the USB connectors. Connect
USB device cable into the USB port of your system.