User's Manual

BIOS Configuration 4-55
CAPTUER 4
8. Replace the system cover according to the instructions in "Replacing the Cover"
in Chapter 5.
Replacing a Hard Disk Drive
Your hard disk drive is installed in the HDD bracket attached on the chassis. You can
install one hard disk drive in the HDD bracket.
Follow the below steps to replace the hard disk drive.
1. Remove the system cover according to the instructions in "Removing the Cover"
in Chapter 5.
2. Detach all cables from the hard disk drive.
3. Remove the screw securing the HDD bracket to the computer. And then slide the
HDD
bracket, as shown below.
4. Remove the screws from the HDD bracket.