User's Manual

CAPTUER 4
4-62 BIOS Configuration
5. Insert the new battery with the "+" side facing up into the battery socket.
6. Replace the system cover.
7. Turn on your system, run the Setup program, and set the date and time again.
Restore any system configuration information that was lost while replacing the
battery according to the copy made in step 1.
After Installing Options
After you install or remove drives, if necessary, be sure to run Setup program to
update the configuration of your system. See Chapter 4 for detail information.
If you installed a hard disk drive on which you want to install an operating system,
install the operating system, drivers, and application programs on the hard disk drive
using the Restore CD after running FDISK. Follow the instructions in Chapter 8.