User Manual

Table Of Contents

Playing Songs Playback

Playing Songs

Playback

In order to play back a Song in the sequencer, you must first

either load the Song from disk, send the Song to the

NAUTILUS via MIDI SysEx, or record a new Song.

Let’s start by loading and playing the demo song data.

1. Follow the instructions for loading and playing the

demo songs under “Playing the demo songs” on

page 11 of the QSG.

Now, let’s experiment with the different controls.

2. Press the SEQUENCER START/STOP button.

Pressing this once starts playback; pressing it again stops

playback. Pressing it a third time resumes playback from

where it stopped.

3. Press the LOCATE button to return to the start of the

Song.

The locate point defaults to the start of the Song. You can

change this as desired; see “LOCATE settings” on

page 74.

4. Press the SEQUENCER REW or FF button to rewind

or fast-forward.

You can use the SEQUENCER REW and FF buttons

during playback or while paused. They are disabled

during recording, and while the Song is stopped.

If you like, you can adjust the rewind and fast-forward

speeds using the FF/REW Speed page menu command.

5. To set the tempo, press the TAP button at the desired

interval.

Solo

Mute/Rec

Status

MIDI Channel

Program Select