Stereo System User Manual

IntroductionPanel TourSetupPlayingCreating

and Storing

Effect TypePedals

ESS

Index

MIDI/DIGITAL

Factory

settings

Trouble-

shooting

Spec. TunerAppendix

The expression pedal target is indicated as follows.

“*/######”

*: Target category

######: Target parameter

• Examples

In addition to the examples we’ve shown here, a wide variety of expression tar-

gets provided for each effect model can be freely assigned to the expression

pedals.

If desired, you can make more detailed settings.

NOTE: For “--OFF--”, “VOLUME”, “M/PITCH”, “D/INPUT”, and “R/INPUT”, operat-

ing the expression pedal does not edit the parameter.

5. Turn value knob 2 to make the name display read “EXP MIN.” Here you can

specify the PITCH value for when the pedal is at the minimum position (pedal

back). Use value knob 2 or the ▲/▼ buttons to adjust the setting.

6. Turn value knob 3 to make the name display read “EXP MAX.” Here you can

specify the PITCH value for when the pedal is at the maximum position (pedal

forward). Use value knob 3 or the ▲/▼ buttons to adjust the setting.

When you operate the expression pedal, the target parameter will change

within the range you speciﬁed here.

NOTE: When you change the expression target, the MIN and MAX values will be

initialized.

7. Press the EXIT switch to return to the mode you were in.

NOTE: The changes you make will not be preserved in the internal memory unless

you store the program.

“--OFF--” --- OFF (controls nothing)

“VOLUME” --- Volume pedal

“P/DIRECT” --- DIRECT (mix amount of original sound)

for a pre-effect (e.g., OCTAVE)

“M/SPEED” --- (*: M (modulation)) SPEED of a modulation effect

“D/INPUT” --- (*: D (delay)) Input level of a delay effect

“R/MIX” --- (*: R (reverb)) MIX (mix amount of reverb sound) of a

reverb effect

“A/GAIN” --- (*: A (drive/amp)) GAIN of drive/amp model