User Manual

199
Style/Pad Record
Main page - Record 1
Reference
For example, you may have CV Length = 4 and Rec Length = 4. If
you set CV Length to 2, and press START/STOP to begin record-
ing, Rec Length is still shown as 4, but it is in reality set to 2, and
recording will cycle for just 2 measures. After you press START/
STOP to stop recording, Rec Length is updated to 2, and all mea-
sures after the second measure are deleted.
CV Length (Chord Variation Length)
This parameter sets the total length (up to 32 measures) for the
selected Chord Variation. When playing a Style, this will be the
length of the accompaniment pattern, when the chord corre-
sponding to the Chord Variation is recognized on the keyboard.
Wa r ni ng : If you reduce the Chord Variation Length after record-
ing, any measure after the selected length will be deleted. Be very
careful when setting the CV Length to a lower value after record-
ing! If it happens, we suggest to exit from record without saving
(see “Exit from Record” on page 225).
Temp o
Select this parameter to use the TEMPO controls to set the
Tempo value.
Hint: You can always change the Tempo, when other parameters
are selected, by keeping the SHIFT button pressed, and rotating the
DIAL.
Note: When recording Tempo, old data is always replaced by the
new data.
Note: The actual Tempo of the Style will be the one shown when
saving the Style Settings in Style Play mode (see “Current Tempo”
on page 89).
Meter
This is the meter (time signature) of the Style Element or the Pad
Sequence. You can edit this parameter only when the Style Ele-
ment or Pad is empty, i.e. before you begin recording anything.
Selected track info area
This line lets you see the Sound assigned to the selected track.
Track name
Name of the selected track.
Drum…Acc5 Style track.
Sound name
Sound assigned to the selected track. You can touch the name to
open the Sound Select window, and select a different Sound.
Sound bank
Bank the selected Sound belongs to.
Program Change
Program Change number sequence (Bank Select MSB, Bank
Select LSB, Program Change).
Key/Chord area
Key/Chord
This parameter pair allows you to define the track’s original key
and chord type, for the current Chord Variation. When playing
the pattern back, this chord will be played back exactly as it was
recorded, without any NTT processing (see above).
Note: To conform to Korg specifications, it is advisable to record
both the “Major” and “minor” Chord Variations for the Intro 1 and
Ending 1 Style Elements.
When you select a track, the original key/chord assigned to the
selected track will be shown. All recorded tracks will play back
on that key/chord. For example, if the original key/chord for the
Acc1 track is A7th, when selecting the Acc1 track all the remain-
ing tracks will play on the A7th key/chord.
In the example above, you will record the Acc1 track in the
AMajor key, with notes pertaining to the A7th scale. This exact
pattern will be recalled, when an A7th chord will be recognized.
Note: This does not apply to Guitar Mode, relying on a different
rule. See “Main page - Guitar Mode” on page 202 for more infor-
mation.
Track name
Sound name
Sound bank
Program Change sequence
Pa300 User Manual v150 (English).book Page 199 Saturday, March 29, 2014 5:29 PM