User Manual

Recording a Guitar track |215
Vel. Chord Type Vel. Chord Type
1 Major 2 Major 6th
3 Major 7th 4 Major 7th atted 5th
5 Suspended 4th 6 Suspended 2nd
7 Major 7th suspended 4th 8 Minor
9 Minor 6th 10 Minor 7th
11 Minor 7th atted 5th 12 Minor major 7th
13 Dominant 7th 14 7th atted 5th
15 7th suspended 4th 16 Dimished
17 Diminished major 7th 18 Augmented
19 Augmented 7th 20 Augmented major 7th
21 Major w/o 3rd 22 Major w/o 3rd and 5th
23 Flatted 5th 24 Diminished 7th
Selecting a Capo
A capo (from the Italian ‘capotasto’, ‘head of fingerboard’) is a movable bar
attached to the fingerboard of the guitar, to uniformly raise the pitch of all
the strings. Its use makes the strings shorter, therefore changing the timbre
and position of the chords (but not its shape).
This might prevent some strings to sound, depending on the chord position.
▪ Use the Capo > Fret pop-up menu to choose a Capo (‘capotasto’).
Capo Meaning
0 Open string – no capo.
I … XII Position of the capo over the ngerboard (i.e., “I” corresponds to the rst
fret, “II” to the second one, and so on).
Selecting the lowest and highest strings
Use the Strings > High/Low parameter pair to choose the highest and lowest
strings to play.
String Meaning
1 … 6 Selected string. The pattern will be played between these strings.