User Manual

Programming the filter envelope (Filter EG) |367
▪ Use the Level parameters (-99…+99) to specify the amount of cutoff fre-
quency change.
EG Level Meaning
Start Change in cutoff frequency at the time of note-on.
Attack Change in cutoff frequency after the attack time has elapsed.
Break (Break Point) Change in cutoff frequency after the decay time has elapsed.
Sustain Change in cutoff frequency that will be maintained from after the
slope time has elapsed until note-off occur.
Release Change in cutoff frequency that will occur when the release time
has elapsed.
▪ Use the Time parameters (0…99) to specify the time over which the cutoff
frequency change will occur.
EG Time Meaning
Attack Time over which the level will change from note-on until the attack
level is reached.
Decay Time over which the level will change from the attack level to the
break point level.
Slope Time over which the level will change after the decay time has
elapsed until the sustain level is reached.
Release Time over which the level will change after note-on occurs until the
release level is reached.