User Manual

12 NC-Q1 SMART NOISE CANCELLING DJ HEADPHONES
Making a call
Make the call from the smartphone or mobile phone.
Receiving a call
When you hear the ring tone from this
unit, press the function button on the
right side of the unit.
Ending a call
During the call, press the function button.
HINT
If a call is made during music playback, playback will pause. When the
call ends, playback resumes automatically.
Noise-cancelling function
You can comfortably enjoy music while reducing ambient noise.

Using noise cancelling
Press the NC button on the right side of the unit
to turn on/off noise cancelling.
• Turning on this unit turns on the NC indicator and
noise cancelling.
• Turning off noise cancelling goes off the NC
indicator.
• The NC indicator flashes when ambient sound
monitoring is on or after switching the ambient
sound monitoring.
NC indicator
NC button
HINT
If this unit is turned on with no Bluetooth device or headphone cable
connected, only the noise-cancelling function can be used.

Noise cancelling in high-volume environments
In environments with extremely loud ambient sound, such as at live venues,
interruption or malfunction of noise cancelling can be reduced by turning on
the attenuator of this unit.
• When noise cancelling is on, press the ATT
button on the right side of the unit to turn on the
attenuator.
ATT
Ambient sound monitoring function
Using the built-in microphone, you can listen to the ambient sound.
Change the settings to adjust the monitoring volume and EQ of the ambient
sound.

Turning on/off ambient sound monitoring
Touch the touch sensor on the right side of the
unit to turn on ambient sound monitoring.
• The ambient sound monitoring can be switched to
either the left or right microphone, or both the left
and right microphones.
Touch sensor