Music Production Station Owner's Manual
Table Of Contents
- Contents
- 1. Introduction
- 2. Front and rear panel
- 3. Basic operation (Quick Start)
- Conceptual diagram of the EM-1
- Listening to a Song
- Listening to Patterns
- Trying out the functions
- Changing the tempo of a song or pattern
- Pressing keys to play the sound of a Part
- Modifying (editing) the sound of a part
- Editing the effect or delay
- Playing the sound of a part along with a song or pattern
- Editing the sound of a part, effect, or delay while hearing a song or pattern
- Modifying (editing) a rhythm or phrase pattern
- Saving a pattern that you create
- Using a Motion Sequence
- Playing with Pattern Set
- Using the EM-1 as a tone generator module
- Synchronizing the playback with other ELECTRIBE models
- 4. Pattern mode
- Selecting a pattern
- Setting the playback tempo
- Playing a pattern (Pattern Play)
- Creating a pattern
- Motion sequence
- Convenient functions for editing patterns
- Transposing a phrase (Transpose)
- Moving data within a part (Move Data)
- Copying a part (Copy Part)
- Data Copy within a pattern
- Copying the sound of a part (Copy Sound)
- Erasing motion sequence data from the part, effect, or delay (Clear Motion)
- Erasing pattern data from a part
- Exchanging data between parts (Swap Part)
- Editing motion sequence data
- Pattern Set
- Saving a pattern (WRITE)
- 5. Song mode
- Selecting a song
- Setting the playback tempo
- Playing a song (Song Play)
- Creating a song
- Creating a song from scratch
- Specifying the Note of each pattern
- Editing a song
- Inserting a pattern at a specified position (Insert Pattern)
- Deleting a pattern from a specified position (Delete Pattern)
- Changing the pattern for a specific position
- Recording knob movements or your performance in a song (Event Recording)
- Deleting event data from a song
- Checking for song event data
- Saving a song (WRITE)
- 6. Global mode
- Metronome settings
- Synchronizing the EM-1 with external MIDI devices (MIDI Clock)
- Setting the MIDI channel of each part (MIDI ch)
- Setting the MIDI note number of a drum part
- MIDI filter settings
- Adjusting the pitch bend range
- Transmit/receive dump data
- Memory Protect (Protect)
- Saving your changes in Global mode (WRITE)
- 7. Appendices
- Index
8
2.Front and rear panel
1
2
7
3
56
4
10
89
2. Front and rear panel
The controls and other parts of the
EM-1 can be broadly grouped as
shown in the diagram.
Common section
1. MASTER VOLUME
This knob adjusts the volume that is output from
the line out jacks and the headphone jacks.
2. Tempo Lock
When this key is on, the tempo will not change
when you select different patterns.
3. Display
This shows the value of the currently selected pa-
rameter, and various messages.
4. Dial
Use this to modify the value shown in the display.
5. MIDI (LED)
This will light when valid MIDI messages are received.
6. Beat (LED)
This will blink at quarter-note intervals to indicate the tempo.
7. [▲][▼] (cursor keys)
In each mode, use these keys to select parameters from the matrix shown in the display.
8. Matrix
The parameters that will appear in the display are listed here for each mode. Use the
cursor keys to make the desired parameter select LED light.
9. Mode keys
These keys are used to select PATTERN, STEP EDIT , SONG, or GLOBAL modes.
10. WRITE key
Use this key when you wish to save settings that you modified in Pattern, Song, or
Global mode, or to save Pattern Set data.