Electronic Keyboard Manual

MIDI OUT
MIDI IN
TG OUTPUT
DUMP IN etc...
KBD/KNOB OUT
DUMP OUT etc...
USB MIDI RX (EXT)
USB MIDI TX (INT)
USB MIDI TX (EXT)
USB MIDI RX (INT)
microKORG XL MIDI OUT
microKORG XL
KBD/KNOB
microKORG XL MIDI IN
microKORG XL SOUND
microKORG XL
PC USB-MIDI Port
microKORG XL
60
USB: Only the USB connector will be used to transmit and receive MIDI
messages.
MIDI: Only the MIDI connectors will be used to transmit and receive MIDI
messages.
CLOCK ............................................. [AUTO, INTERNAL, EXT USB, EXT MIDI]
Specifies how the microKORG XL will synchronize with an external MIDI
device (sequencer, rhythm machine, etc.). If the LFO 1/2 or delay effect
“BPM SYNC” is On, the LFO rate and delay time will also synchronize in
the same way as the arpeggiator.
AUTO: The microKORG XL will automatically function using the External
(or USB) setting if MIDI clock messages are being received from an exter-
nal MIDI device connected to the MIDI IN connector. If no MIDI clock mes-
sages are being received, the internal setting will be used.
INTERNAL: The arpeggiator will sync to the internal clock (specified by
knob [TEMPO]). Select this setting if you are using the microKORG XL by
itself, or if you are using the microKORG XL as the master (controlling
device) so that an external MIDI device will synchronize to the MIDI clock
messages from the microKORG XL.
EXT USB: The microKORG XL’s arpeggiator will synchronize to the MIDI
clock messages received from an external USB MIDI device connected to
the USB connector.
EXT MIDI: The microKORG XL’s arpeggiator will synchronize to the MIDI
clock messages received from an external MIDI device connected to the
MIDI IN connector.
NOTE When sync’ing to an external MIDI device, refer to that device’s owner’s
manual.
MIDI FLT (MIDI Filter)
Here you can adjust the the microKORG XL’s MIDI Filter settings.
PROG CHG (Program Change).......................................[DISABLE, ENABLE]
Selects whether program changes will be transmitted and received.
DISABLE: Program changes will not be transmitted or received.
ENABLE: Program changes will be transmitted and received.
CTRL CHG (Control Change)..........................................[DISABLE, ENABLE]
Selects whether MIDI control changes will be transmitted and received.
DISABLE: MIDI control changes will not be transmitted or received.
ENABLE: MIDI control changes will be transmitted and received.
P.BEND (Pitch Bend)....................................................[DISABLE, ENABLE]
Selects whether pitch bend messages will be transmitted and received.
DISABLE: Pitch bend messages will not be transmitted or received.
ENABLE: Pitch bend messages will be transmitted and received.
MIDI OUT
MIDI IN
TG OUTPUT
DUMP IN etc...
KBD/KNOB OUT
DUMP OUT etc...
USB MIDI RX (EXT)
USB MIDI TX (INT)
USB MIDI TX (EXT)
USB MIDI RX (INT)
microKORG XL MIDI OUT
microKORG XL KBD/KNOB
microKORG XL MIDI IN
microKORG XL SOUND
microKORG XL
PC USB-MIDI Port
MIDI OUT
MIDI IN
TG OUTPUT
DUMP IN etc...
KBD/KNOB OUT
DUMP OUT etc...
USB MIDI RX (EXT)
USB MIDI TX (INT)
USB MIDI TX (EXT)
USB MIDI RX (INT)
microKORG XL MIDI OUT
microKORG XL KBD/KNOB
microKORG XL MIDI IN
microKORG XL SOUND
microKORG XL
PC USB-MIDI Port