Rhythm Production Sampler Owner's Manual
Table Of Contents
- Contents
- 1. Introduction
- 2. Front and rear panel
- 3. Basic operation (Quick Start)
- Conceptual diagram of the ES-1
- Listening to a Song
- Listening to a Pattern
- Listening to a Sample
- Trying out the functions
- Changing the tempo of a song or pattern
- Striking keys to play Parts
- Modifying (editing) the sound
- Editing the effect and delay settings
- Striking the part keys along with a song or pattern
- Editing the sound of a part, effect, or delay while hearing a song or pattern
- Modifying (editing) a rhythm pattern
- Saving a pattern you create (Write)
- Using a Motion Sequence
- Connecting various sources to the audio inputs
- Let’s record a sample
- About the Slice function
- About the Resample function
- Assigning a sample sound to a sample part
- Playing with Pattern Set
- Using the ES-1 as a tone generator module
- Synchronizing with an EA-1 or ER-1
- 4. Sample mode
- Recording a sample
- Selecting a sample
- Playing a sample
- Modifying a sample
- Specifying the start location
- Specifying the end location
- Specifying the fade-out length
- Directly sampling the sound of the ES-1 (Resampling)
- Slice
- Other functions for editing a sample
- Deleting a sample(Delete Sample)
- Checking the remaining amount of sampling area (Memory)
- Saving a sample (WRITE)
- 5. Pattern mode
- Selecting a pattern
- Setting the playback tempo
- Playing a pattern (Pattern Play)
- Creating a pattern
- Motion sequence
- Convenient functions for editing patterns
- Editing motion sequence data
- Pattern Set
- Saving a pattern (WRITE)
- 6. Song mode
- 7. Global mode
- 8. Appendices
17
3. Basic operation (Quick Start)
3. Basic operation (Quick Start)
Editing the sound of a part, effect, or delay while hearing a
song or pattern
1. In either Song mode or Pattern mode, press the Play/
Pause key to begin playback.
2. Press a part key (the key will light) to select the part that
you wish to edit.
3. Use the knobs or keys of the Part Edit section or Effect
section to edit the sound. As you operate the knobs or
keys, the sounds or effects being played will change.
You can press another part key to edit another part.
The settings of the Effect section are shared by all parts.
If you wish to save the pattern sound settings that you edit here, use the Write procedure
(☞p.20 “Saving a pattern you create (Write)”)
If you re-select the pattern or turn off the power without performing the Write proce-
dure, the sound will return to its un-edited state.
If a stereo sample is assigned to sample part 1 or 3, sample parts 2 or 4 will not sound.
While a Song is playing, it is not possible to write edits made to the part sound, effect,
or delay. It is only possible to write edits made to the part sound while a Pattern is
playing.
1
3
3
2