Rhythm Production Sampler Owner's Manual
Table Of Contents
- Contents
- 1. Introduction
- 2. Front and rear panel
- 3. Basic operation (Quick Start)
- Conceptual diagram of the ES-1
- Listening to a Song
- Listening to a Pattern
- Listening to a Sample
- Trying out the functions
- Changing the tempo of a song or pattern
- Striking keys to play Parts
- Modifying (editing) the sound
- Editing the effect and delay settings
- Striking the part keys along with a song or pattern
- Editing the sound of a part, effect, or delay while hearing a song or pattern
- Modifying (editing) a rhythm pattern
- Saving a pattern you create (Write)
- Using a Motion Sequence
- Connecting various sources to the audio inputs
- Let’s record a sample
- About the Slice function
- About the Resample function
- Assigning a sample sound to a sample part
- Playing with Pattern Set
- Using the ES-1 as a tone generator module
- Synchronizing with an EA-1 or ER-1
- 4. Sample mode
- Recording a sample
- Selecting a sample
- Playing a sample
- Modifying a sample
- Specifying the start location
- Specifying the end location
- Specifying the fade-out length
- Directly sampling the sound of the ES-1 (Resampling)
- Slice
- Other functions for editing a sample
- Deleting a sample(Delete Sample)
- Checking the remaining amount of sampling area (Memory)
- Saving a sample (WRITE)
- 5. Pattern mode
- Selecting a pattern
- Setting the playback tempo
- Playing a pattern (Pattern Play)
- Creating a pattern
- Motion sequence
- Convenient functions for editing patterns
- Editing motion sequence data
- Pattern Set
- Saving a pattern (WRITE)
- 6. Song mode
- 7. Global mode
- 8. Appendices
4. Sample mode
4. Sample mode
29
When you turn on the power (i.e., in the default state),
sampling will be monaural.
If you press the Play/Pause key during resampling, sam-
pling will continue but the pattern or song playback will
be paused.
Resampling from the middle of a
pattern or song
1. Make sure that you are in Pattern mode or Song mode.
2. Press the Stop/Cancel key to stop playback.
3. Press the Play/Pause key to begin playback of the pattern or
song. (The Play/Pause key will light.)
4. At the instant that you wish to begin sampling, press the Rec
key while holding down the Pattern Set key. (The Pattern Set
key, Rec key, and the Play/Pause key will light.)
5. If you press the Stop/Cancel key, sampling will stop. (The
Pattern Set key, Rec key, and Play/Pause key will go dark.)
Alternatively if you press the Rec key without pressing the
Stop/Cancel key, sampling will stop but playback will con-
tinue. (The Pattern Set key and Rec key will go dark, and the
Play/Pause key will be lit.)
1
3
4
5
The sampling method (monaural/stereo) will be as speci-
fied by the setting described earlier in “Resampling from
the beginning of a pattern or song.”
If you press the Play/Pause key during resampling, sam-
pling will continue but the pattern or song playback will
be paused.
Resampling just one note of a part
1. Make sure that you are in Pattern mode, Song mode, or
Sample mode.
2. Press the Stop/Cancel key to stop playback.
3. Hold down the Pattern Set key and press the Rec key to enter
sampling-ready mode. (The Rec key will light, and the Pat-
tern Set key and Play/Pause key will blink). The display will
blink to indicate the sampling method (monaural/stereo).
4. Rotate the dial to select monaural (“
n
no”) or stereo (“StE”).
5. Press the key for the part that you wish to sample. The part
you pressed will sound, and at the same time, sampling will
begin. (The Pattern Set key, Rec key, and Play/Pause key will
light.)
6. Press the Stop/Cancel key when you want to stop sampling.
(The Pattern Set key, Rec key, and Play/Pause key will go
dark.)
If you wish to cancel sampling-ready mode, press the Stop/
Cancel key before you start sampling.
4
2,6
1
3
5