Operation Manual

Getting Started • 4. Tutorial
31
2 Move the cursor to the control track, and
change the status to CTRL (already recorded).
3 Move the cursor to the keyboard track, and
change the status to REC (in record).
Now, the keyboard track is in REC status (in
record), the control track is in CTRL status (already
recorded), the chord track is in CHRD status
(already recorded). The only track in record is the
keyboard track.
4 Press START/STOP to start recording.
After a two measure precount, the arrangement
will begin playing and recording will start.
5 Play the solo part.
If the keyboard mode is split, the solo part should
be played by the right hand.
6 When finished, press START/STOP to stop
recording.
When recording has stopped the REC/WRITE led
will go off. The sequencer will go back to measure
number 001.
7 Press START/STOP again to playback the piece
you have just recorded.
The piece will be played from beginning to end.
When it reaches the end, the sequencer will go back
to measure number 001. You can stop playback by
pressing START/STOP; in this case, press RESET to
get back to measure number 001.
Recording an Extra Track
In addition to the arrangement tracks, the song has
extra tracks where you can freely record strings back-
ing, support parts, solos, etc. In the example, we shall
record onto Extra Track 8.
1 Press the PAGE [+] button repeatedly to get to
the Extra Track page.
2 In the VOLUME section, press one of the right
most pair of buttons to select Extra Track 8
(ETr8).
3 Move the cursor to the upper line using the
CURSOR buttons.
4 Using the PROGRAM BANK and PROGRAM
NUMBER buttons, select the program that you
wish to assign to Extra Track 8.
5 Press EXIT/NO to go back to page 1. Then
press REC/WRITE to enter the recording mode.
6 Move the cursor to the selected track (ATr) using
the CURSOR buttons.
7 Use the TEMPO/VALUE buttons to select ETr8
instead of ATr.
This sets the Extra Track 8 in record mode.
8 Press START/STOP to start recording.
After a two measure precount, the arrangement
will begin playing and recording will start.
Keyboard track
Chord track
Control track
Metronome
Tempo mode
Quantize value
Selected track(s)
Keyboard track
Chord track
Control track
Metronome
Tempo mode
Quantize value
Selected track(s)