Operation Manual

Getting Started • 6. Connecting directly to a computer (iS40)
50
4 Click on the [Out Port Setting: MIDI Out] button.
The dialog window shown alongside will appear. In this dia-
log window you can select the MIDI channels and messages
you wish to output from each port. Once you have pro-
grammed this, click on [OK].
5 Start up your MIDI application (sequencer); whose icon
will appear in the PatchBay window. Drag the mouse
from the Out Port symbol of the MIDI application, to the
MIDI IN symbol of the MIDI Driver.
• You can find more information on using PatchBay in “About PatchBay...” in the “ ” menu.
Setting up the Apple MIDI Driver
If you wish to use the Apple MIDI driver instead of the Korg MIDI driver, remove the Korg MIDI Driver from the
System Folder, open the PatchBay, double click Apple MIDI Driver icon, select Enabled for the port that the instru-
ment is connected to, and then [1 MHz] as the Interface Type, finally, close the dialog window. In PatchBay, drag the
mouse from the Out Port symbol of the MIDI application (sequencer) to the MIDI IN of the Korg MIDI Driver.
Applications which do not use the Apple MIDI Manager
If you wish to use a MIDI application (sequencer) that is incompatible with the Apple MIDI Manager, program the
communication parameters through the MIDI Preferences of the application itself. As a communicating port, select
the port that the instrument is actually connected to (Modem or Printer). Choose a [1 MHz] Clock.