User Manual

9
Panel description and functions
Front panel (AMP/LFO/EG)
LFO controls
Use these to edit the LFO parameters.
FREQ knob
This knob adjusts the frequency of the LFO.
INTENSITY knob
This knob adjusts the depth to which the LFO will affect
the filter or pitch.
EG select button
This selects the EG that will be
edited by the EG controls. The
LED of the currently selected
EG will light up.
The LED will blink in
synchronization with the EG’s effect.
LFO select button
This buon selects the LFO that will be edited by the LFO
controls. The LED of the currently selected LFO will light
up. The LED will blink in time with the LFO frequency.
VOCODER button
This turns the vocoder on/off.
This turns the vocoder function
on/off. By pressing this buon while
holding down the SHIFT/EXIT
buon, you can turn Mic Thru on/off.
VELOCITY button
This turns on/off velocity sensitivity
for the EG, which allows the EG
seings to vary according to the
amount of force you use when
playing the keyboard.
EG controls
These adjust the EG parameters.
ATTACK knob
This adjusts the time from note-on (the
moment you play a key) until the aack
level (the maximum value of the envelope)
is reached.
DECAY knob
This adjusts the time from when the aack
level is reached until the sustain level is
reached.
SUSTAIN knob
This adjusts the level where the volume
will be held aer the decay time has elapsed.
RELEASE knob
This adjusts the amount of time from
note-off (the moment you release the key)
until the volume has completely decayed
to silence.
UNISON button
This turns the timbre’s Voice Unison
function on/off.
By pressing this buon while holding
down the SHIFT/EXIT buon, you can
jump to the unison voice seing screen.
AMP LEVEL knob
This adjusts the volume of the timbre.