User's Manual

7
Basic operation
1. Before Using the MR-2
Inserting or Replacing Batteries
TheMR‐2requirestwoAA‐sizebatteries.Werecom‐
mendthatyouus enickel‐metalhydridebatteries,but
youmayalsousealkalinebatteries(LR6).
Theperformanceofalkalinebatteriesdifferssignif‐
icantlybetweenmanufacturers.Toensurethatthe
MR‐2operatesinastablemanner,pleaseusebat‐
teriesfromareputa
blema
nufacturer(seepage58).
Donotcombinenewandusedbatteriesordifferent
typesofbatteries.
TheserialnumberoftheMR‐2isprintedonthe
labelinsidethebatterycase.Youmaybeaskedfor
theserialnumberifyoucontactKorgoryournear‐
estKorgdealerregardingth
eproduct
orrepair.
1. Makesurethatthepowerisswitchedoff.AllLED
indicators,andthedisplayshouldalsobeoff.
2. Removethebatterycasecover.
3. Ifthebatteriesareinthecase,removethemfromthecase.
4. InserttwoAA‐sizebatteriesintothecasewiththe+and−endsinthe
correctorientation.
5. Replacethebatterycasecover.
Replacethebatterieswithnewoneswhenbatterypowergetslow.
Whenthebatteriesexpire,removethemfromthecaseimmediately.Ifyou
don’ tplantousetheunitforalongperiodoftime,removethebatteries.
Batterylifevariesdependingonthetypeandmanufacturerofthebattery
andusage.Italsovariesdependingonthetypeandmanufacturerofthe
memorycardusedanditscapacity.
Battery life (when the backlight and LED indicators are turned off with
the built-in microphone)
Batterytype(seepage41) Continuousrecording/Continuous
playback(When44.1kHzproject)
NiMHbattery(1900mAh)x24hours/4hours
Alkalinebatteryx22ho
urs/2.5
hours
Serial
number