User's Manual
10
Selecting a bell for the accent
1. HolddowntheMETRONOMEbuonuntiltheMet-
ronomeseingsmodeisentered.
2. PresstheE.PIANO1buon,andtheaccentsoundset-
tingwillappearinthedisplay.
3. SelecttheseingwiththeUPorDOWNbuonbe-
sidethedisplay.
The seing range consists of oFF (no accent sound), on1
(emphasized sound for the accent beat) and on2 (bell
sound for the accent beat); the default seing is oFF.
2
1,4
3
3
4. PresstheMETRONOMEbuttontoexittheMetro-
nomeseingsmode.
Specifying the tempo (Metronome settings mode)
1. HolddowntheMETRONOMEbuonuntiltheMet-
ronomeseingsmodeisentered.
2. PresstheE.PIANO2buon,andthetempowillap-
pearinthedisplay.
3. SpecifythesettingwiththeUPorDOWNbutton
that’slocatedbesidethedisplay.
The seing range is
q
= 40–240; the default seing is 120.
To return to the default setting, simultaneously press
the UP and DOWN buons.
2
1,4
3
3
4. PresstheMETRONOMEbuttontoexittheMetro-
nomeseingsmode.
Selecting the Metronome Sound
1. HolddowntheMETRONOMEbuonuntiltheMet-
ronomeseingsmodeisentered.
2. PresstheHARPSI/CLAVbuon,andthemetronome
soundseingwillappearinthedisplay.
3. SpecifythesettingwiththeUPorDOWNbutton
that’slocatedbesidethedisplay.
The setting range consists of 1 (acoustic) and 2 (elec-
tronic sound); the default seing is 1.
2
1,4
3
3
4. PresstheMETRONOMEbuttontoexittheMetro-
nomeseingsmode.
The metronome
The LP-380 is equipped with a metronome, which can be
changed to a bell sound, which is convenient for practicing.
Turning on/off the metronome
Press the METRONOME button. The
button lights up, and the metronome
starts.
To stop the metronome, press the METRONOME button
again. The buon turns o.
Specifying the tempo
When the tempo appears in the dis-
play (default seing of 120), regardless
of whether the metronome is turned
on or off, the tempo can be specified
with the UP and DOWN buons beside the display.
The seing range is
q
= 40
–
240.
To return to the default seing, simultaneously press the
UP and DOWN buons.
Selecting the time signature
1. HolddowntheMETRONOMEbuonuntiltheMet-
ronomeseingsmodeisentered.
The METRONOME buon blinks, the PIANO1 sound
buon lights up, and the time signature (04) appears in
the display.
When the Metronome settings mode is entered, the
time signature seing normally appears.
2. Toselectthetimesignatureafterchangingother
settingsintheMetronomesettingsmode,pressthe
PIANO1buon.
3. SelecttheseingwiththeUPorDOWNbuonbe-
sidethedisplay.
The setting range consists of 02 (2/4), 03 (3/4), 04 (4/4)
and 06 (6/4); the default seing is 04.
To return to the default setting, simultaneously press
the UP and DOWN buons.
2
1,4
3
3
4. PresstheMETRONOMEbuttontoexittheMetro-
nomeseingsmode.
Adjusting the metronome volume
1. HolddowntheMETRONOMEbuonuntiltheMet-
ronomeseingsmodeisentered.
2. PressthePIANO2button,andthevolumewillap-
pearinthedisplay.
3. SpecifythesettingwiththeUPorDOWNbutton
that’slocatedbesidethedisplay.
The seing range is 1–13; the default seing is 10.
To return to the default setting, simultaneously press
the UP and DOWN buons.
2
1,4
3
3
4. PresstheMETRONOMEbuttontoexittheMetro-
nomeseingsmode.