User's Manual
4
12.Soundbuons:
This button is used to select from 30 sounds (10 × 3
banks). Two buons can be pressed to play two sounds
simultaneously (Layer mode).
13.Display:
The display shows seings, for example, for the Func-
tion mode and the metronome.
14.UP/DOWNbuons:
These buons are used to select a value for the various
seings.
15.METRONOMEbuon:
This buon is used to start/stop the metronome. While
the metronome is being used, the buon lights up. In
addition, hold down the buon to enter the Metronome
seings mode, where various metronome seings can
be specied.
16.MIDI(IN,OUT)connectors:
These are jacks that are used to connect other MIDI de-
vices (sequencer, keyboards, etc.).
OUT: Data output
(to be connected to the MIDI IN connector of an-
other MIDI device).
IN: Data input
(to be connected to the MIDI OUT connector of an-
other MIDI device).
17.LINEOUTjack:
This is the main audio output jack, where a stereo mini
plug can be connected to the input jack of an amplier
or powered speakers, or to the AUX In jack of other
gear.
Use the VOLUME knob to set the output volume.
18.DC19Vjack:
Connect the included AC adapter here.
19.Speakerconnector:
Connect the cable from the speaker box here (cf. As-
sembling the stand).
20.Pedalconnector:
Connect the cable from the pedal unit here (cf. Assem-
bling the stand).
1
2
12
14
3
13
5
4
6
8
7
10
11
9
15
17
18
16 19 20
Connector box
Control panel
Connector box
(on the back)
1. Headphone( )jacks(Frontoftheconectorbox):
Two stereo mini plugs for headphones can be inserted
here. When the headphone plug is inserted, the inter-
nal speaker will not produce sound.
2. Powerbuon:
This buon turns the LP-380 on or o.
3. VOLUMEKnob:
This knob adjusts the volume for the speakers, the Out-
put and the Phones connectors.
4. PIANOSONGbuon:
This buon is used to enter the Piano song mode, aer
which the button lights up. Simultaneously pressing
this button and the TRANSPOSE button enters the
Sound demo song mode.
5. TRANSPOSEbuon:
This buon is used to adjust transposition. While trans-
posing, the buon lights up. Simultaneously pressing
this button and the PIANO SONG button enters the
Sound demo song mode.
6. FUNCTIONbuon:
This buon is used to enter the Function mode, where
pitch, temperament and other settings can be speci-
ed. Hold down the buon to enter the MIDI function
mode, where MIDI seings can be specied. The buon
lights up when the LP-380 enters the Function mode
and blinks when it enters the MIDI function mode.
7. TOUCHbuon:
This buon lets you select the keyboard sensitivity.
8. BRILLIANCEbuon:
This buon is used to adjust the brightness of the tone.
9. REVERBbuon:
This button is used to turn on/off the reverb, which
adds ambience to the sound. When this eect is on, the
buon will be lit up.
10.CHORUSbuon:
This button is used to turn on/off the chorus, which
adds richness to the sound. When this eect is on, the
buon will be lit up.
11.BANKbuon/LEDs:
This button is used to select the desired sound bank.
The LED for the bank that’s currently selected will
light up.
Parts and their functions