Operation Manual

132
Card Edit environment
File and folder size display
FILE AND FOLDER SIZE DISPLAY
Thesizeofanyfileandfolderinthecardcanbeseenin
thedisplay.
Thesinglefilesizeisalwaysshownontherightofthe
fi
le:
Toseeafoldersize,firstmoveittothefirst
lineofthe
display,thenkeeptheSHIFTbuttonpressed,andpress
the F‐3 (OPEN) function button under the display. A
dialogboxwillappear,showingthesizeofthefolder:
PressEXITtoexitthisdialog.
PAGE STRUCTURE
HereisthetypicalstructureofaCardpage.
Operating mode icon
WhenintheCardEditenvironment,oneoftheoperat‐
ingmodesisstillactiveinthebackground.Theope
rat‐
ing mode icon shows which mode is currently active.
Press
 EXIT to go back to the current operating mode
fromanyoftheCardpages.
Page header
ThislineshowstheCardpageyouarein.
Card content
These lines show the content of the current folder.
Movethe itemto select to the firstline, using the E–F
(ScrollUp) and G–H(ScrollDown) VOLUME/VALUE
buttons,ortheTEMPO/VALUEcontrols.
Use the Page commands (F‐1–F‐4) on the last li
ne to
executeanoperationontheselectedfileorfolder.
The“ ”sy
mbolbeforeanameidentifiesa
folder(i .e.,
a“folder”containingotherfiles).
Page commands
You can use these commands to browse through files
and folders, and  to execute data transfer commands
(load, save…). Commands may be different in any
Cardpage.UsetheF‐1–F‐4buttonstoselectthecorre‐
spondingcomm
and.
NAVIGATION TOOLS
WheninaCardpage,youcanuseanyofthefollowing
commandstobrowse through thefilesand folders, or
throughthelistofcommands.
E–F (Scroll Up)
Scrollthelistup.KeepSHIFTpressedandpressoneof
thesebuttonstojumptothepreviousa lphabet ical sec‐
tion.
G–H (Scroll Down)
Scrollthelistdown.KeepSHIFTpressedandpressone
of these buttons to jump to the next alphabetical sec‐
tion.
TEMPO/VALUE section
Thesecontrolsscrollthelistupordown.
F-1 (SD)
Pressthisbuttonafterreplacingacardinthecardslot.
After pressing this button, the new card will be
scanned,and thefilelistshown onthedisplaywillbe
updated.
F-2 (Data transfer command)
Executestheshownoperation.
F-3 (OPEN)
Opens the selected folder or bank (files whose name
beginswiththe“ ”icon.
F-4 (CLOSE)
Closes the current folder, returning to the parent
(“upper”)folder.
Operating mode icon
Page header
Page commands
Card content