Operation Manual

22
Rear panel
5. REAR PANEL
1 PHONES
Usethisjacktoconnectapairofheadphones.Youcan
use headphones with an impedance of 1
6–200Ω (50Ω
suggested). Use a headphone distributor to connect
morethanonepairofheadphones.
2INPUT
Usetheseunbalancedconnectorstoinputanotherkey
boar
d/synthesizer, a (nonpowered)mixers output, or
aCD/tapeplayer(l
ineimpedance).The signalisauto
matically routed to the speakers, the Audio Outputs
andthePhones.
3OUT
PUTS
Usetheseunbalancedconnectorstosendtheaudiosig
nal (sound) to a mixer
,aPA system, a set ofpowered
monitors,or
yourhifisystem.Settheoutputlevel with
theMASTERVOLUMEslider.
4 DAMPER
Use this to connect a Damper pedal, like the KORG
PS1,PS
3orDS1H.Tochangeitspolarity,see“Damper
Pol.(DamperPolarity
)”onpage126.
5 ASSIGN. PDL/SW
Use this to connect a continuous or footswitch pedal,
liketheKORGEX
P2orXVP10.Toprogramit,see“P/S
(Pedal/Switch)”onpage126.
6 MIDI interface
The MIDI interface allows your microARRANGER to
be connected to an external controller (master key
board, MIDI guit
ar, wind controller, MI
DI accor
dion…), to an expander, or to a computer running a
sequenceroraneditor.Formor
einformationonhowto
usetheMIDIinterface,seetheMIDIchapter.
IN Thisconnector receives MI
DIdatafroma
computeror acontroller.Connect ittoan
external controllers or computers MIDI
OUT.
OUT ThisconnectorsendsMIDIdatagenerated
bythemi
croARRANGER’skeyboard,con
trollers, and/or the internal sequencer.
Connectittoanexpand
ersorcomputers
MIDIIN.
7 DC 12V (AC power adapter connector)
Plugthesuppliedpoweradapterintothisconnector
.
8 SD Card Slot
To insert an SD card (or SDHC card),
push it into th
e slot until it clicks into
place.ToremovetheSDcard,pushitin;
the card will pop out slightly, allowing
youtopullitout.
Note: Car
efully read the ownerʹs manual
that came with yo
ur SD card, and observe
the instructions regarding care and han
dling.
Note:TakecaretoinserttheSDcardinthecorr
ectdirection
andorientation,and besuretopressitalltheway intothe
slot.Donotuseexcessiveforce.
12 3 45 6 7 8
Connector
side