User Manual

Adjusting the OCTAVE range and the DRIVE knob, and the using the

Slider.

As you play, you can use the ve-way OCTAVE Switch to

transpose the playing area of the keyboard by ± 2 octaves.

Turn the DRIVE knob to adjust the drive eect, which adds

harmonics and distortion to the sound.

In addition, you can move the Slider from left to right to add

real-time performance control.

TIP

The parameter assigned to the slider will vary depending

on the Program. Rrefer to “Program List” (p. 54) to see

which parameter is assigned to the slider in each Program.

TIP

The Slider Assign function in PROGRAM EDIT mode is used to as-

sign parameters to the slider (“Slider Assign”, p. 31).

Playing the Sequencer

Each Program in the monologue includes sequence data. In this section, we’ll

play the sequence data saved as part of the preset Programs.

Turn the PROGRAM/VALUE knob to select a Program.

The display will indicate the Program name and number.

Press the PLAY buon in the SEQUENCER section.

The sequence data that is recorded in the current Program will begin playing.

The 1–16 buons will light up in steps while the sequencer is playing.

TIP

If you press the KEY TRG/HOLD buon (the buon will stay lit) in-

stead of the PLAY buon and then play the keyboard, the sequence

data will play back while a key is being pressed. If you hold down

the KEY TRG/HOLD buon (the buon will begin to blink) and then

play the keyboard, the sequence data will keep playing back, even af-

ter you take your hand o the keyboard. Press a dierent key on the

keyboard while holding down the KEY TRG/HOLD buon as it lights

or ashes, to play back the sequence data transposed.

2, 3